Inline FabricationRepackboxMidSouth Shooters SupplyWideners

Results 1 to 12 of 12

Thread: LBT Still In Business???

  1. #1
    Boolit Buddy
    Join Date
    Oct 2010
    South Prairie, WA 98385

    LBT Still In Business???


    Ordered and paid for two moulds a few months ago.

    Checking on the status, I telephoned and emailed to get no response.

    Check has been cashed.

    Has anyone received any LBT products lately? (moulds, grease, etc...)



  2. #2
    Boolit Grand Master Bazoo's Avatar
    Join Date
    Dec 2013
    Cecilia, Kentucky
    Iíve heard this same story for about 5 years or more now. Entry time itís no communication and then finally the mould arrives. Some folks just put their head in the sand and wait, some fret over it. Donít make no difference to Mr Smith it seems.
    Last edited by Bazoo; 11-26-2022 at 07:40 PM.

  3. #3
    Boolit Master Rapier's Avatar
    Join Date
    Sep 2020
    NW Florida
    Today you just about need to call, to make sure people are still working. I get asked all of the time, my stock answer is call first.
    ďThere is a remedy for all things, save death.ď

    ďNever give up, never quit.Ē
    Robert Rogers
    Rogerís Rangers

    There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves.
    Will Rogers

  4. #4
    Boolit Mold
    Join Date
    Sep 2009
    I paid for a mould 8 months ago still nothing.

  5. #5
    Boolit Buddy
    Join Date
    Jan 2020
    I bought his 2nd edition of jacket performance with lead bullets 4or 5 years ago sent a check it was cashed no book finally got him to answer a e-mail to which he replied he is still writing the book but when it is finished he would mail it to me , at this point i decided it's only 28 bucks count it as a lost and be glad it's not a 120.00 dollar mould , Now the only LBT moulds I get come from e-bay. wish it were different love his moulds but his customer service is non existent .

  6. #6
    Boolit Master

    Join Date
    Nov 2006
    Middle Tennessee
    He makes more money making molds than answering phones.

  7. #7
    Boolit Grand Master

    stubshaft's Avatar
    Join Date
    Apr 2009
    Southernmost State of the Union
    I called and spoke to his daughter about a month and a half ago and she told me he had broken his hip.
    Old enough to know better, young enough to do it anyway!

    When the only tool you have is a hammer, every problem is a nail.

  8. #8
    Join Date
    Jan 2010
    Flame on ....

    Way back when veral got himself 4 years in prison for tax evasion.
    Had an attitude after he got out an got a month or two more here an there . ....
    Around that time he brought out the crazy and started saying how the government was attacking him with microwave radiation and all sorts of other off the wall stuff .

    I decided that even though the man seems to know about cast bullets and everyone said he made good molds I wouldn't be doing business with him , mostly because of the crazy paranoid comments and partly with the known felon aspect and firearms ....

    Hope you folks get what you paid for or your money back .....

  9. #9
    Boolit Master
    tja6435's Avatar
    Join Date
    Apr 2014
    Westcliffe, CO 81252
    Last mold I ordered from LBT was in 2017, actually 2x 4 cavity molds. They arrived before the check had been cashed. I called to make sure he had the check and offered to send another if he lost the first one.

    I find his molds cast fantastically right out of the box. I hope Veral can recover from his hip break and get back to business.
    8500' Wet Mountain Valley, Colorado

  10. #10
    Boolit Master
    Join Date
    Mar 2011
    ive bought from him once and never again.he cashed my check for a mould and it was 6 months before i recieved it.Phone calls and emails didnt make any difference. IMO he is the worst when it comes to anyone in the mould business. He doesnt deserve anyones business. That experience ruined me for anything LBT.Now knowing he has been in prison makes sense,

  11. #11
    Boolit Bub

    Join Date
    May 2019
    Northern Lower Michigan
    Took about 7 months here to receive the mold I ordered with no replies to emails or calls then oneday checked the mail and there it was, good mold to specs.

  12. #12
    Boolit Master
    Join Date
    Sep 2016
    Veral sold me a hardness tester. He and I had a polite, respectful, prompt and informative exchange of a few emails on the niceties of fine tuning it.

    Iíll grant, though, that it was something like five years ago and came out of stock on hand, not like a custom ordered mold.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check