Lithium Grease/Beeswax lubes have got to be one of the most goofproof things out there. PERIOD.....they just plain work and the range of %'s that they work at are very generic and just plain hard to screw up.
I make MML for all my hunting lubes it does the cold really well with NO first shot flyers when the weather makes your lungs hurt and the trees are sparkling/snapping and popping from the cold:
3 LB Beeswax (1/3 = 1 lb/16 oz./454 g)
1 LB Canning Paraffin (1/3 = 5.33 oz/151 g)
1 -14oz tube of cheap caramel colored lithium auto grease (1/3 = 4.67 oz/132.4 g)
1/2 LB Microwax 430 from blended waxes .com (1/3 = 2.67 oz/75.7 g).
Melt the grease....add the micro/paraffin.........add the beeswax....keep it just molten for a few minutes while stirring to ensure it is all homogenous....your done.
For warmer weather and general non hunting use I have been using a stiffer MML/Thick mix of:
7.5Lbs beeswax
1lb Microwax #430
1lb (ish) glob of white lithium grease #630-2 from an old steel Lubriplate bucket as I have alot of it and it works. This mix does not throw any first shot flyers in the weather I have tested it in thus far and accuracy is simply amazing.
Both lubes will do any speed the rifles I use it in can handle presure wise and both have been north of 2600fps with accuracy and zero leading. Lithi-bee type recipes need not be measured out with labratory grade equipment. You can even use volume measurements if you keep track of what you did to get where you went to find happiness. I use the microwax to keep the lubes friendly and flexibendy and it has the added benefit of reducing/eliminating first shot flyers but just lithi/bwax can be used when you find the percentage that YOU and YOUR GUNS like.