Interesting post, I have a few presses, started with a Lyman Tong Tool, still have one for my go bag, with a set of dies, dipper, a Lyman 38 cal 158 SWC plain base mould and lube cutter made from a cut off 38-55 case wrapped with speed tape. Probably the most unusual press I have is the Metalic II Posess/Warren progressive. Works like a single stage, with a swing arm shell holder, primer feed tube and a powder throw mounted on top. I primarily use it to load cast in bottle neck cases with spherical buffer with a Little Dandy. On the right side on the bench.
There are 6 other presses (2 RCs, a 550 B, 3 MECs) plus two sizer lubers on the bench.Been loading since 62.