Has anyone turned down an M die Plug... Shipping being Higher than the Lee or Lyman Plugs...I am Considering it.. (37 to 311)
Or, Should I go to Swap and try to Trade???
Thanks for thinkin on this with me...
Has anyone turned down an M die Plug... Shipping being Higher than the Lee or Lyman Plugs...I am Considering it.. (37 to 311)
Or, Should I go to Swap and try to Trade???
Thanks for thinkin on this with me...
I've made a few on my lathe and if you're handy with tools it wouldn't take much to turn one down using a drill or drill press, files and sandpaper. Just check the size often and go slow. Once you've taken material off you can't put it back.
What he said. They're easy to make if you have a lathe and that way you have the original too. Don't try to make the threads. Just drill and tap it and jam a screw in there then cut the head off.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |