WidenersReloading EverythingTitan ReloadingLoad Data
Lee PrecisionMidSouth Shooters SupplyRepackboxInline Fabrication
RotoMetals2
Results 1 to 9 of 9

Thread: WTT Mould(s) for Mould(s) TC Lyman Lee

  1. #1
    Boolit Master
    metricmonkeywrench's Avatar
    Join Date
    Apr 2016
    Location
    Virginia
    Posts
    1,107

    WTT Mould(s) for Mould(s) TC Lyman Lee

    WTT- I have some unused molds and a sizer I wish to trade, either all together or in part for a different mould(s) to be an equitable value. Please respond via PM- if a deal is struck I will post it in the ad. This IS NOT a case of the first "I'll Take it" as I am looking for a trade for what I need for me- don't be offended if i don't take the first offer or reply right away. Additional Pix or info available on request.

    TC .45 Maxi-Ball- appears to be in nice condition but I have not used it.
    Shiloh RB mould marked 454J
    Lyman 2 Cav 380 RB mould
    Lee 459-500 Mould and associated .458 sizer. Supposedly the bullet of choice for the 458 SOCOM or for use in a 45-70 Govt.
    The little single ball mould with 448 and 1967 Cunningham and Mc Atee Savannah Ga engraved on it will be thrown in free for the asking

    I am looking for steel (Lyman, Ideal RCBS etc) .30 caliber (double cavity preferred) mould(s) 170g or better.

    Figure each party in the trade will cover their shipping costs.

    If there are no takers for trades after a few days I may close this out or convert it to a WTT/WTS ad.

    Attachment 306458
    Last edited by metricmonkeywrench; 11-29-2022 at 09:40 AM. Reason: corrections

  2. #2
    Boolit Master Maven's Avatar
    Join Date
    Mar 2005
    Posts
    4,946

    Arrow

    The little single ball mould with 488(?) marked on it will be thrown in free for the asking


    mmw, I think the brass ball mould in the center is a Jeff Tanner (England) product. It is of especially good quality if it is.

  3. #3
    Boolit Grand Master Good Cheer's Avatar
    Join Date
    Jul 2010
    Location
    the Ark
    Posts
    5,277
    Is that Lee 45 mold the 500 grain GC or plain base?

  4. #4
    Boolit Grand Master Good Cheer's Avatar
    Join Date
    Jul 2010
    Location
    the Ark
    Posts
    5,277
    By the way, on the .30 molds, what bore rider diameter do you need? I have some Lyman molds with different diameters up front on the part that rides on the bore. The #311334 is all the way down to like .295/.296

  5. #5
    Boolit Master
    metricmonkeywrench's Avatar
    Join Date
    Apr 2016
    Location
    Virginia
    Posts
    1,107
    Gentlemen Please be aware this is not a discussion post I will answer direct questions on the items I have listed- any other conversations or offers need to go via PM.

    Maven- I corrected the engraved size to 448 in the ad. On the opposite side it is engraved 1967 Cunningham and Mc Atee Savannah Ga

    Good Cheer- the Lee 459-500 is a plan based mould.

  6. #6
    Boolit Grand Master Good Cheer's Avatar
    Join Date
    Jul 2010
    Location
    the Ark
    Posts
    5,277
    Quote Originally Posted by metricmonkeywrench View Post
    Gentlemen Please be aware this is not a discussion post I will answer direct questions on the items I have listed- any other conversations or offers need to go via PM.

    Maven- I corrected the engraved size to 448 in the ad. On the opposite side it is engraved 1967 Cunningham and Mc Atee Savannah Ga

    Good Cheer- the Lee 459-500 is a plan based mould.
    The pointy one with deep lube grooves?

    If so I'd like to get it and the .458 sizer for a muzzleloader.
    Do you know the bore rider diameter needed for a .30 mold?

  7. #7
    Boolit Master



    BrassMagnet's Avatar
    Join Date
    Apr 2012
    Location
    SE Missouri
    Posts
    2,926
    454J is a Shiloh mould and I hear they use Lyman handles.

  8. #8
    Boolit Master
    metricmonkeywrench's Avatar
    Join Date
    Apr 2016
    Location
    Virginia
    Posts
    1,107
    Thanks BrassMagnet, updated

  9. #9
    Boolit Master
    metricmonkeywrench's Avatar
    Join Date
    Apr 2016
    Location
    Virginia
    Posts
    1,107
    Gonna bump this once back to the top, open to cash offers with shipping

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check