Around the bolt that locks down the sprue plate, there is a thin washer that fits around the top of the bolt. Does anyone have an extra washer they would part with ?? Let me know what you want for it. I will reimburse your postage also.
Thanks in advance.
Ohio Rusty ><>
"This is America !!, where many have fought and died for our right
to celebrate our views with inflatable creatures in our yards ......."
Get some Wave washers (10mm as I recall) at your local Ace Hardware. I've replaced most all of the Lyman washers with those.
Larry Gibson
“Deficient observation is merely a form of ignorance and responsible for the many morbid notions and foolish ideas prevailing.”
― Nikola Tesla
6mm. IIRC the 1/4" ones are a bit loose, but the metric 6mm have enough slack to fit the 1/4" stud.Originally Posted by Larry Gibson
Also, FWIW, I like to put a thin brass flat washer between the wave washer and the sprue plate. Finding one that's thin enough can be problematical, though.
Ohio Rusty, please PM me your mailing address, and I'll send you one (or both, if you prefer). Freebie. (In return, you could research where to find more of these -- good luck!-- and let everyone know.)
I PM'd gunwonk and took him up on his washers offer. I appreciate it for sure.
Ohio Rusty ><>
"This is America !!, where many have fought and died for our right
to celebrate our views with inflatable creatures in our yards ......."
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
