Quote Originally Posted by Outpost75 View Post
Sounds like a good plan. I load 3.5 grains of Bullseye with a cast 150-grain DEWC.
What diameter do your bullets drop, and what expander do you use?

Mine drop at almost .360 from a SAECO 348 clone by MP.

I purchased a .358-.362 expander from Buffalo Arms, but I’m about to send it back. It sizes correctly, but the downstroke requires so much force, it’s actually loosened the press from its mount. This is with virgin Starline brass. I actually had one separate when I had the expander set too deep.

I have their .357-.361 that works fine if I size the bullets first. It tears up the as-cast bullets.

Apologies for the thread hijack