Inline FabricationMidSouth Shooters SupplyTitan ReloadingRotoMetals2
WidenersRepackboxBonettLee Precision

Results 1 to 3 of 3

Thread: Portugeuse Verguerio bolt issue

  1. #1

    Portugeuse Verguerio bolt issue

    Recently picked up a Vergueiro rifle in 6.5 and disassembled the bolt to clean. I'd heard they're infamous for reassembling the bolt but I'm truly stumped. Following this video
    HTML Code:
    https://m.youtube.com/watch?v=AkUDEKmlewg
    It's all fine until I try to get the cocking piece on and it just won't slide all the way in. Comparing my firing pin to photos of others it looks as if the threads at the end of the firing pin are not in the right position relative to the head, almost like it's twisted. It started off together and so I figure it should go back together. Hopefully someone knows these bolts better can share their wisdom.

    Photos -
    HTML Code:
    https://imgur.com/a/HI1uYpo

  2. #2
    Boolit Master

    Uncle Grinch's Avatar
    Join Date
    Jul 2005
    Location
    Middle Georgia
    Posts
    1,583
    I’ve got two Portuguese Vergueiro rifles and have had the bolts apart on them. I had to use a video to reassemble it and it helps to have a third hand. Can’t answer your question right off and I’m not about to disassemble mine again to find out…. Good Luck!
    Shoot Safe,
    Mike

    Retired Telephone Man
    NRA Endowment Member
    Marion Road Gun Club
    ( www.marionroad.com )

  3. #3
    Fixed it, the end of the firing pin was in fact bent - managed to get it back together with it in the vise and a ring spanner combined with an unnerving amount of leverage. Cocks and releases properly but I'm never taking that unholy abomination apart ever again.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check