Recently picked up a Vergueiro rifle in 6.5 and disassembled the bolt to clean. I'd heard they're infamous for reassembling the bolt but I'm truly stumped. Following this videoIt's all fine until I try to get the cocking piece on and it just won't slide all the way in. Comparing my firing pin to photos of others it looks as if the threads at the end of the firing pin are not in the right position relative to the head, almost like it's twisted. It started off together and so I figure it should go back together. Hopefully someone knows these bolts better can share their wisdom.HTML Code:https://m.youtube.com/watch?v=AkUDEKmlewg
Photos -HTML Code:https://imgur.com/a/HI1uYpo