Titan ReloadingMidSouth Shooters SupplyLoad DataRotoMetals2
WidenersReloading EverythingRepackboxLee Precision
Inline Fabrication
Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Thread: Best lead alloy for .45-70 hunting?

  1. #1
    Boolit Master
    Join Date
    Jan 2015
    Location
    Indy
    Posts
    537

    Best lead alloy for .45-70 hunting?

    What is the best alloy to hunt deer with in a .45-70 Sharps? Been using .405's and Postal I bought but am going to start casting my own. Have the Lyman dies.

  2. #2
    Boolit Master hc18flyer's Avatar
    Join Date
    Mar 2013
    Location
    NE Nebraska
    Posts
    1,180
    Not hunting yet. I am casting 95 % lead, 2.6 tin, and 2.4 antimony, loading trapdoor loads. Runs about 11.5 bhn, by alloy calculator. Intend to stay in the 1300 fps neighborhood for hunting too. Thinking I want to go to 25 to 1 now? I will be following this thread too. hc18flyer
    Last edited by hc18flyer; 09-13-2022 at 06:42 PM. Reason: Clarifying info

  3. #3
    Boolit Grand Master


    stubshaft's Avatar
    Join Date
    Apr 2009
    Location
    Southernmost State of the Union
    Posts
    5,854
    I use 16 to 1 in my hunting loads for my 45/70's, the animals usually end up DRT!
    Old enough to know better, young enough to do it anyway!

    Men who don't understand women fall into two categories: bachelors and husbands!

  4. #4
    Boolit Master

    Johnch's Avatar
    Join Date
    Jun 2005
    Location
    NW Ohio
    Posts
    3,505
    For low velocity ( Trap Door loads )
    I use 20-1

    As I move up in pressure and velocity I increase to a harder alloy

    John
    Yea, thou I walk through the valley of the shadow of death, I will fear no evil; for thou art with me; Thy rod and thy staff, they comfort me.
    And I carry a LOADED Hell Cat

  5. #5
    Boolit Grand Master Good Cheer's Avatar
    Join Date
    Jul 2010
    Location
    the Ark
    Posts
    5,276
    Up until 1987 I had a beautiful trapdoor stamped 1889 that had a huge groove diameter.
    No way the chamber would accept cartridges loaded with bullets that big.
    So I shot black with heavy soft lead that expanded to fill the rifling.
    Conclusion: Add enough tin so that it's easy to fill out the mold and get lovely boolits.

  6. #6
    Moderator


    Winger Ed.'s Avatar
    Join Date
    May 2007
    Location
    Just outside Gun Barrel City, Texas
    Posts
    9,480
    I add just enough goodies plus a little bump of them to get good fill out.

    Until you get up past the mid-teens, fairly soft boolits will do fine.
    In school: We learn lessons, and are given tests.
    In life: We are given tests, and learn lessons.


    OK People. Enough of this idle chit-chat.
    This ain't your Grandma's sewing circle.
    EVERYONE!
    Back to your oars. The Captain wants to waterski.

  7. #7
    Boolit Master
    Join Date
    Apr 2013
    Posts
    1,423
    Quote Originally Posted by warren5421 View Post
    What is the best alloy to hunt deer with in a .45-70 Sharps? Been using .405's and Postal I bought but am going to start casting my own. Have the Lyman dies.
    Toss up between 30-1 /pure works well too/Ed

  8. #8
    Boolit Master
    Join Date
    May 2022
    Location
    MPLS
    Posts
    1,486
    I load pure lead for all my 45/70s, 45/60, even use pure in my bear gun for fishing, all at about 1200 FPS or a tad less. very accurate in all my guns.

  9. #9
    Boolit Buddy Walstr's Avatar
    Join Date
    May 2013
    Location
    SE WISConsin
    Posts
    278
    Quote Originally Posted by hc18flyer View Post
    Not hunting yet. I am casting 95 % lead, 2.6 tin, and 2.4 antimony, loading trapdoor loads. Runs about 11.5 bhn, by alloy calculator. Intend to stay in the 1300 fps neighborhood for hunting too. Thinking I want to go to 25 to 1 now? I will be following this thread too. hc18flyer
    Greetings;
    I add about 4% Pewter [tin] to the COWW for a great mould fill out recipe. I learnt this alloy "age hardens". I placed a 4 month sample on my anvil, smacked it with carpenters 16/18 oz hammer & there was little evidence it was 'disturbed'! Its a bone crusher for sure.

    Some fellow casters & hunters experimented with "annealing" the nose via hand torch & pan of water to protect the main body.

    I'm launching with Marlin 1895GS @ 1500 FPS, Alox lubed, 405gr. @ shooting bench. Best 3 shot group was .6" @ 100yd., 34.5gr of IMR 4198. No leading. 4 moist patches cleans the powder residue with a few lead flakes included.

    Boolit [slug] w/grooves harvested from a squib load to stay in the barrel, then "push" out with a dowel & gentle hammer taps. Yes, it's a "bore rider"; my first design & Mountain Molds machined it. He's retired now.

    Click image for larger version. 

Name:	DSC00800 My MM461-405 Bbl Slug, 26K.JPG 
Views:	40 
Size:	26.6 KB 
ID:	304464 Click image for larger version. 

Name:	My MM w Xlox DSC00962.jpg 
Views:	32 
Size:	49.3 KB 
ID:	304465
    Last edited by Walstr; 09-23-2022 at 09:20 PM. Reason: Additional data.
    Been loading 6.5 CM for ELD, learning to load Mosin Nagant & .308/7.62x51
    Caster & CWW / Lead miner.
    Mountain Mold 45-70-405, 80% Meplat, sized .461" dia. for Marlin 1895GS
    Lyman mold #429421 "Elmer Keith" style 255gr, Dbl Cavity; [for .44 Mag, S&W 629, Alox lubed]
    Lyman #356402, 9mm, Sngl Cavity [for a friend]
    LEE #90282, 12ga Drive Key, 7/8oz Slug [for: Son's 3-Gun]
    LEE #90349, 452-255RF, 6 Cavity [for 45 Colt & 45 ACP; Alox lubed]
    LEE #90697, 453-200RF, ditto

  10. #10
    Boolit Master
    Join Date
    Sep 2007
    Posts
    1,404
    530 grains, 30:1, Lord Black. Shoots 5 in 1.5” with an elbow rest and tang sight. Boom-flop
    I have danced with the Devil. She had excellent attorneys.

  11. #11
    Boolit Buddy
    Join Date
    Feb 2010
    Posts
    212
    With real black I have used pure lead and acww. With a 500 grain pointed bullet I shot a deer at 600 yards. Deer went about150 yards. Using a 400 grain fn cast of acww over enough IMR3031 to get to 2000fps out of my Marlin 1895 deer move just over 2 feet down. Good luck with your sharps.

  12. #12
    Boolit Master
    Join Date
    Sep 2012
    Location
    NE Wisconsin
    Posts
    1,438
    Quote Originally Posted by gunseller View Post
    With real black I have used pure lead and acww. With a 500 grain pointed bullet I shot a deer at 600 yards. Deer went about150 yards. Using a 400 grain fn cast of acww over enough IMR3031 to get to 2000fps out of my Marlin 1895 deer move just over 2 feet down. Good luck with your sharps.
    I am curious as to the meplat diameter of each boolit you used. My experience in the .458 diameter calibers that a WFN can be hard and still drop deer hard. Even at lower to moderate velocities.

    I have one of the Henry single shot rifles a I load a 460 grain WFN over Unique that thing drops deer like the hammer of Thor that boolit leaves the barrel at 1350 FPS I might add that gun is an absolute treasure to shoot and carry.

  13. #13
    Boolit Master
    Join Date
    Jan 2015
    Location
    Indy
    Posts
    537
    I use a 1884 built Trapdoor, a H&R Trapdoor, Sharps, Marlin 1895 with 32” barrel and Parsons 6x scope, and a stock Marlin 1895. Like the trapdoors best. Buffalo Bill used Lucretia Borgia, a .50 Trapdoor to make his nickname.

  14. #14
    Boolit Buddy
    Join Date
    Jan 2022
    Location
    Central TX
    Posts
    191
    I use 30/1 for deer with the Lyman/Gould 330 HP from my 1886 Browning and Sharps. Not pushing them extremely fast, about 1450, equivalent to the original express loads. Have had a couple at very close range (20-30 yards) where I had multiple exit wounds. Still very effective. Been considering 20/1, 16/1 or 96/2/2 but don't know if any of those would be better. Have not lost one with my present loads and those that run don't go far, often a bang-flop.

  15. #15
    Boolit Grand Master


    GregLaROCHE's Avatar
    Join Date
    Feb 2018
    Location
    Southern France by way of Interior Bush Alaska
    Posts
    5,286
    I suggest using the softest alloy you can without leading at the velocity your shooting. Add a bit of tin to help with fill out. It really helps to get nice boolits. I wouldn’t have any antimony in the alloy if possible.

  16. #16
    Boolit Bub
    Join Date
    Mar 2017
    Posts
    66
    I use water cooled wheel weights. This is what my gun likes. If I could get away with a softer alloy I would but unfortunately every softer alloy I’ve tried has lackluster accuracy. The hard alloy in a wfn profiled bullet has been impressive on taking whitetail deer. I try to shoot them in the shoulder and they don’t go far. Muzzle velocity is low probably 1200-1300 fps.

  17. #17
    Boolit Buddy
    Join Date
    Feb 2010
    Posts
    212
    Quote Originally Posted by Ramjet-SS View Post
    I am curious as to the meplat diameter of each boolit you used. My experience in the .458 diameter calibers that a WFN can be hard and still drop deer hard. Even at lower to moderate velocities.

    I have one of the Henry single shot rifles a I load a 460 grain WFN over Unique that thing drops deer like the hammer of Thor that boolit leaves the barrel at 1350 FPS I might add that gun is an absolute treasure to shoot and carry.
    The 400 grain wfn is around .350. I don't know who made the mold as I bought it in a box of reloading stuff for only a few $. The 500 grain is pointed but with 63 grains 2f it matches the sights on the trapdoor. It will also shoot under 2 inches at 2 hundred yards when cast of ww.

  18. #18
    Boolit Master
    Join Date
    Sep 2006
    Posts
    550
    gunseller,
    Trapdoor "2 inches at 200"...
    You have hellish better eyes than I do to shoot that well with the Buffington sight and blade front.
    also you forgot to use the usual term "all day long"

    Just funning you
    beltfed/arnie

  19. #19
    Boolit Master
    Join Date
    Jan 2015
    Location
    Indy
    Posts
    537
    My trapdoor shooting the Lyman 125 has done 2" 10 rounds @ 200 yards in my dreams. At 77 I do good to hold 4" at a 100 yards. At a 100 yards the Lyman has always put the meat in the pot. Using the Marlin I have to hand load the round as the bullet is to long for the action but with the scope 200 yards is easy. Using 67 gr of FFFg it will do 2" AT 200 YARDS if the the wind god isn't playing with me.

  20. #20
    Boolit Master

    pworley1's Avatar
    Join Date
    Dec 2013
    Location
    Mississippi
    Posts
    3,252
    I just use clip on wheel weights with a little tin.
    NRA Benefactor Member NRA Golden Eagle

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check