I need a neck expander for my Dillon 550 @.430. Lathesmith done currently make them. Does anyone else?
Thanks
I need a neck expander for my Dillon 550 @.430. Lathesmith done currently make them. Does anyone else?
Thanks
lee. factorysales.com, I believe is the web page ??
I can make one but it will need one to copy!
not sure about this one:
https://lousgunwork.com/M-Neck-Expan...wder-Dies.html
“Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem.” Ronald Reagan
I sent that guy a email and got no response.
I’ve got a Dillon for 45ACP. Could you turn that one down to .430?
I just measured a 45 ACP funnel for a Dillon I have. It's about 0.285-290 inside diameter, so I think you could turn it down. The one I have looks chromed (I'm pretty sure it's not just polished). That would be easiest for someone to turn down to start from something already made. The 45 ACP one I have has a bulged at the end, and then its reduced up to the flare portion. You would also want the powder funnel to be long enough to go down in the brass for the bullet you are using.
JW
Jason
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |