Drop me a note if you can cast some for me. I have a new old toy i need to feed.
Bosshoss
Drop me a note if you can cast some for me. I have a new old toy i need to feed.
Bosshoss
I have a lee .379 250 mold. Not sure if this helps. Round is for a 38-55. I can be emailed at caspiker85@gmail.com.
Bullets drop at around.380 255 in pure lead
“ We must assuredly all hang together or we will surely hang separately “
Benjamin Franklin
The .38-40 round actually mikes ~.401", so projectiles for a .38-55 would be too small.
For in much wisdom is much grief: and he that increaseth knowledge increaseth sorrow. Ecclesiastes 1:18
He that troubleth his own house shall inherit the wind: and the fool become servant to the wise of heart. Proverbs 11:29
...Verily I say unto you, Inasmuch as ye have done it unto one of the least of my brethren, ye have done it unto me. Matthew 25:40
Carpe SCOTCH!
I still cannot believe that nobody has posted that they have one of these.
I really must be looking for a unicorn to feed my unicorn....(Winchester 92 saddle ring carbine w/octagon barrel) ((lettered by Winchester)).
I find a very rare rifle, dropped on me by a stroke of luck, and I cannot even find someone who even has the mold for it.
LOL, I bought a Lyman mold similar to it, but the Real McCoy would be nice.
Maybe you need a Lyman mould. Lyman moulds are not usually unicorn teeth!
Several years ago I used bullets intended for a 10mm handgun for the only 38-40 I ever loaded for. They worked well. I think I recall Lee makes a truncated cone mold in .401?
Good Luck to you,
Rick
Missouri Bullet has several bullets for the 38 WCF. Click here: https://missouribullet.com/results.p...5&secondary=22
I have a 38-40 mould for my Magma Master Caster that really knocks out boolits. This mould is a flat nose bevel base 180gr that I shoot in my 73' Winchester and 1894 Marlin. Have a STAR luber set up too. How many do you want? I am in SW Pennsylvania. How far are you?
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |