What would be the closest mold to a typical 9mm 115gr?
|
   
   
|
|
What would be the closest mold to a typical 9mm 115gr?
Lee roundnose 125 grain mold. Lee designates it as 356-125. I use a six-cavity mold and Pro 20 bottom pour for 3.2 grain of Bullseye.
Ron
In all, the .41 Magnum would be one of my top choices for an all-around handgun if I were allowed to have only one. - Bart Skelton
Accurate. 35-123H.
http://www.accuratemolds.com/img/bul.../35-123H-D.png
Last edited by Outpost75; 08-15-2022 at 06:46 PM.
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
NOE is another good choice https://noebulletmolds.com/site/shop...6-4-cavity-bb/
I don't think .354 would cut it. Most shoot 9mm @ .358Originally Posted by Targa
HTC354-115-RN-V6
Powder coating will bring it up to snuff, which is what that boolit is designed for.
Otherwise, a Lyman 356-242 120 grain is a very old boolit for these applications. Mine casts at about .357.
_________________________________________________It's not that I can't spell: it is that I can't type.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote