Other than the red paint, you are looking at a MEC Steelmaster set up to load steel and lead 12ga up to 3.5 inch magnums.
This thing is the complete setup. It was ordered as a sizemaster and upgraded with automatic primer feed, it is setup to easily adjust between 2.75, 3, and 3.5 inch shells (without having to remove bolts and change parts) with the MEC Short Kit, upgraded with BPI super-crown 8 point crimper. Set up for steel or lead shot.
Includes 4 charge bars (7/8, 1, 1-3/8, 1 Steel) and 15 bushings between 27 and 41, 5 bottles for powder and shot.
It is ready to pull the handle on and spit out some fine looking shells. I can include any or all of the components shown in the video, which the buyer and I will negotiate a package deal on The primers must be picked up in the Los Angeles CA area
I am going to try to do something different here and link an explanatory video instead of pictures so I can narrate it!
Click the link below for the video!
https://drive.google.com/file/d/1vm0...ew?usp=sharing
SPF in the PMS
|
   
   
|
|
