Teach them, let them be the judge of what is reasonable. One thing for sure over $2.00 a pop is not reasonable, for regular hunting ammo. And the shop owner apologized for the price but said that was all he could get.
Teach them, let them be the judge of what is reasonable. One thing for sure over $2.00 a pop is not reasonable, for regular hunting ammo. And the shop owner apologized for the price but said that was all he could get.
“There is a remedy for all things, save death.“
Cervantes
“Never give up, never quit.”
Robert Rogers
Roger’s Rangers
There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves.
Will Rogers
I am seeing a lot more reloading equipment show up on used forums and at much better prices. And if they are at decent prices, they are sitting for a few days or a week. Compare that to over the last year where people were selling used equipment at new prices since all of the new equipment was out of stock.
Do you really think people who started with a Lee LOADER kit would drop out because it was slow and they don't know there were other options?
I've read dozens of posts from people who got into reloading with the old Lee LOADER kits because they were inexpensive and then they grew into a wide interest and much more volumes. On the other hand, I've never even heard of anyone saying they started reloading and then dropped out because their LOADER kit was so slow; in fact, I can't believe anyone actually believes that!
I've been case cramming since '65 and have a short ton of reloading tools carefully chosen for my needs, not someone else's. As a young father with three little girls and their momma depending on me, I wanted the tools I saw in gun magazines but I started my reloading with a Lee .30-06 LOADER kit because I could handle that. I've known several avid reloader/collectors who still buy (and use) any old Lee kit they can find but, sadly, they haven't been made for decades so they're a moot issue for today's noobs.
As I said once before, it's hard for avid hobbyists who load thousands of rounds a month on 1150 Dillons to not think other people should start high just in case others might someday want to go where they are now; that's some rarely true nonsense. But Lee's semi-excellent old whac-a-mole kits are long gone so they don't matter.
The present best low cost starting gear for most folk would be based on Lee's little "RELOADER" press and RGB dies. Not only is that an inexpensive basic starting place for noobs on a budget, it really works quite well and it's all most low volume shooters will ever need.
When you have to chase each component for reloading,its somewhat easier to have to chase only one item......a packet of 20 rounds of 223 or 308 or 9mm .....all seem to be in good supply here,and nowhere near US$2 a round.......223 well under US$1 a round,308 about US 1.15,and 9mm ,only US 30 cents a round.
Personally, I find the entire process to be therapeutic. It’s nice to sit down at my bench and shut off the world and focus on a simple task that results in my ability to shoot when many of my friends can’t or won’t. Yes, it costs me money and time but many of those same friends are burning their money and time at a bar or hopping up a car they’ll sell at a loss within a year. At least my hobby results in something beneficial. There is also the benefit of being able to be just a bit more self reliant. There is a pride in saying “I made this and I can make it again.”
When I was young my father told me to save my brass because one day I could learn to reload it. To this day he has never reloaded a single cartridge but that idea of reusing what others considered trash held a sort of mystique for me. He bought me a used MEC 12 gauge setup and the old man that sold it to him taught me just enough to be dangerous (quite literally). Eventually I bought my own Rock Chucker kit and started learning center fire. I started with 9x19 and .223. I’m sure I could have bought factory ammo much cheaper but then I wouldn’t have learned the lessons of those first loads. Soon I was learning how to load the finicky 7.62x25 and .32ACP, casting my own boolits, and eventually making gas-seal rounds for my Nagant revolver. I love that I can take any ammunition I find and harvest components to use or modify for use in other cartridges. I’m now loading for nearly 20 cartridges, I have successfully reloaded primers, and have started swaging .224” bullets from .22lr brass thanks to BTSniper. I know I have spent more on my tooling and components than I have saved but the knowledge I’ve gained over these years has been invaluable. I’m now to point that I have what I need and want and can start to really benefit financially from the investment.
So, is it worth starting to reload today? If they are the type of person who values the ability to make something from essentially nothing, then absolutely. If they are only trying to save money, not unless they are into obsolete cartridges or decide to shoot competitively. I have steered many folks away this hobby because they were careless people or had unrealistic expectations. Others I have encouraged and aided in their learning of the skill. It really is a very personal experience that is different for everyone.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |