WidenersInline FabricationRotoMetals2Repackbox
Titan ReloadingLee PrecisionMidSouth Shooters Supply

Results 1 to 5 of 5

Thread: 250 grain lead round nose flat point boolits

  1. #1

    250 grain lead round nose flat point boolits

    can I use the same load, 6.3 grains of bullseye powder for a 250 grain round nose flat point as for a 250 grain swc both being lead boolits?
    As long as I keep the oal length with the limit for 45 colt. I have once fired starline brass, and my brother used to say starline brass was almost match quality brass.

  2. #2
    Boolit Master

    Walks's Avatar
    Join Date
    Jun 2016
    The Lyman Cast bullet manual #4 and previous editions have always shown slight differences in powder changes between the #454190 & # 452424/454424.
    However I've loaded both over identical powder charges all My life, as My Dad did before me.
    I think the factory duplication load of Bullseye for .45Colt is about 5grs.
    I HATE auto-correct

    Happiness is a Warm GUN & more ammo to shoot in it.

    My Experience and My Opinion, are just that, Mine.

    SASS #375 Life

  3. #3
    Boolit Master
    Mal Paso's Avatar
    Join Date
    Jun 2010
    Carmel, Ca
    Standard 45 Colt I show (Speer) a max charge of Bullseye at 7g for 250g LSWC. Plenty of room so seating depth won't change much. I would use your same load for a RNFP.

    Mal Paso means Bad Pass, just so you know.

  4. #4
    Boolit Bub
    Join Date
    Dec 2021
    I started loading back in the late 1970's with the free manuals the powder companies used to give away. They typically listed loads by bullet weight instead of a particular bullet. I still load that way most of the time unless it's for something really out of the ordinary like the monolithic rifle bullets which are likely to yield significantly different pressure compared to standard bullet designs. I would interchange the two bullets you are talking about with that load and not worry about it at all.

  5. #5
    Boolit Master

    GregLaROCHE's Avatar
    Join Date
    Feb 2018
    Southern France by way of Interior Bush Alaska
    Technically there would be a difference, but you’d have to split a lot of hairs to find it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check