MidSouth Shooters SupplyTitan ReloadingADvertise hereLee Precision
RotoMetals2BonettInline FabricationRepackbox

Donate Now Goal amount for this year: 6000 USD, Received: 4790 USD (80%)
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206
****Due to overwhelming e-mails, I will be very slow in updating this list. Please bear with me!****


Results 1 to 3 of 3

Thread: Hatsan help?

  1. #1
    Boolit Master bosterr's Avatar
    Join Date
    Dec 2011
    Location
    Western Pa.
    Posts
    717

    Hatsan help?

    I know this is a long shot but here goes. My Model 95 .22 caliber finally gave up after 7000+ shots. Hatsan USA Service said the Type 1 Vortex piston likely lost most of it's pressure. This rifle is made in Turkey and the part is out of stock and it's not known when it will be back in stock. It's out of warrantee. Is there any such thing as a independent repair person out there I could contact for a quicker repair?

  2. #2
    Boolit Buddy
    Join Date
    Jan 2006
    Location
    Northwest Ohio
    Posts
    187
    As the owner of a Model 95 .22 cal, I'm sorry to hear about this. I just finished the second package of CPHP's through mine. From what I've gathered from various air gun boards, the "standard solution" for Hatsan parts is to watch their web site for a refurb gun as a source of parts (or a cheaper working replacement). They are often half the price of new, but .22s are harder to find. Depending on what parts you need, it may even end up cheaper than buying parts. In your case, scarcity of .22 guns isn't as much a problem since you didn't have a caliber specific part that failed. Another avenue, there is a fellow on You-Tube named Mike Ellingsworth, who does some work on Hatsans and a number of other pellet gun brands. He has several videos, showing how he does things. He may not be able to help directly, but probably knows of some other resources. Bad comes to worse, it is possible to convert the Vortex to a spring powered gun. There are a few Hatsan specific parts involved, but there are a number of sources for springs. There are quite a few airgun boards, you might take a look at a few of them for other options.

    Another source for refurbs is https://www.fieldsupply.com/airguns/refurbished.html I took a look and they show in stock on an M95 in .22 for around $150.

    Good Luck!

    Trapshooter
    Last edited by Trapshooter; 08-05-2022 at 07:45 PM. Reason: typing problem &added 2nd source

  3. #3
    Boolit Buddy
    Join Date
    Jun 2015
    Posts
    135
    There isn't much to go wrong with a spring-piston gun. Most likely are the breech seal, the piston seal and the spring. The breech seals are standard sizes for Hatsan. The piston seal is again pretty standard and you should find aftermarket alternatives. I think Hatsan has 2 cylinder sizes. The springs are really easy to source. YouTube has lots of videos on disassembly. If your gun has the quattro trigger, they are fiddly and you need a short section of rod to hol the trigger bits together once the trigger is out.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check