I'm wanting to buy a .410 neck reamer that will fit an RCBS Trim Pro. The forster neck reamers will not fit and I'm trying to avoid buying a whole entire set up to ream 200 necks once.
|
   
   
|
|
I'm wanting to buy a .410 neck reamer that will fit an RCBS Trim Pro. The forster neck reamers will not fit and I'm trying to avoid buying a whole entire set up to ream 200 necks once.
May want to look at Letter Z (0.413") drill bit or 13/32 drill bit (0.406") for the smaller drill take expander ball out. That is what I used for my 0.416 wildcat.
Drill bit would probably be a good idea. Necks are just too thick and my patches on my dual diameter bullets are getting torn when firing as the necks are too thick and not enough room to release, also keeps me from shooting greasers. Just need to calculate how many thou needs to come off.
Last edited by tmanbuckhunter; 07-30-2022 at 10:12 PM.
I ended up reaming with a drill bit while neck was supported in a die.
A chucking reaper from McMastsr-Carr would do a better job than trying to use a twist drill.
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
