It's in the frig.
The ice is sticking together in the bin.
Seems to be getting worse.
I remember there was a way to adjust for that.
Something to do with the three screws under a cover.
Any ideas????
It's in the frig.
The ice is sticking together in the bin.
Seems to be getting worse.
I remember there was a way to adjust for that.
Something to do with the three screws under a cover.
Any ideas????
Put a thermometer in there, it may not be cold enough.
In school: We learn lessons, and are given tests.
In life: We are given tests, and learn lessons.
OK People. Enough of this idle chit-chat.
This ain't your Grandma's sewing circle.
EVERYONE!
Back to your oars. The Captain wants to waterski.
You have an icemaker that actually did make ice at one time?
Ice makers frequently have a fan that helps keep the ice cold enough. If it is an ice dispenser another problem can be the little door that opens to dispense the ice not closing. I have had both of those problems in the past.
This is the inside the freezer ice maker.
I replaced it once.
Freezer is cold enough to freeze foods.
I remember there was an adjustment to do to solve this problem.
It has three adjustment screws.
If I remember correct....
one is for how fast it makes ice.
Two is to adjust the amount of water and size of cubes.
Three is the heater in the drum.
It heats slightly so the ice can be pushed out of the drum.
At least that's what I kind of remember.
Screws not labeled.
Gotta know what make and model ice maker you have. As the ice makers have gotten newer, the less field adjustment they have.
Ice makers Pfft, Wife has broken 4 of them so far, I no longer attempt repairs, She's on her on.
If you know the fridge make & model # you can probably get the info on line
If the cubes are sticking, (bridging) together it's probably over filling.
Steve,
Life Member NRA
Colorado Rifle Club member
Rocky Mtn Gun Owners member
NAGR member
I once had a commercial ice maker. I spent so many hours to keep it running, finally got rid of it.
Ice sticking together in the bin is because they aren’t being kept cold enough. The surface melts slightly and then they refreeze sticking together. All self defrosting freezers will have this problem to some extent. Turn the temperature control down.
”We know they are lying, they know they are lying, they know we know they are lying, we know they know we know they are lying, yet they are still lying.” –Aleksandr Isayevich Solzhenitsyn
My Straight Shooters thread:
http://castboolits.gunloads.com/show...raight-shooter
The Pewter Pictures and Hallmarks thread:
http://castboolits.gunloads.com/show...-and-hallmarks
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |