9mm flatpoint to the head makes a mess!

[ElCheapo]

Took a stroll around the farm yesterday with my Sig P365XL and this guy popped up about 12 to 15 yards away. I was fortunate to make a good shot...

[725]

Well done.

[WinchesterM1]

I use 40mm V-MAX for mine, Thea the “critter getter” I keep beside the fridge In the house

[ElCheapo]

Thanks!

[ElCheapo]

I use 40mm V-MAX for mine, Thea the “critter getter” I keep beside the fridge In the house

Nice!

[ElCheapo]

By the way, load was the 95 grain LEE RNFP with enough Green Dot to get 1400 fps.

[Geezer in NH]

I would have thought a 40mm would have vaporized a target that small.

[MostlyLeverGuns]

I have shot 40mm out of the M79 and M203, did NOT know Hornady made a V-MAX for it.

[WRideout]

I would have thought a 40mm would have vaporized a target that small.

Just don't stand too close to the target.
Wayne

[Kosh75287]

I'VE only shot 37mms. I'm such a lightweight. No V-Max tho.

[farmbif]

im still wondering how many grains the slugs are in those 357mm that Walmart no longer sells

[Bigslug]

I don't think he's going to be dancing to Kenny Loggins' "I'm Alright". . .

[CastingFool]

I shot a woodchuck the other day with my Axis 223. The 55 gr spire point just about gutted the critter. Took off the front leg and every thing else b that was behind it. Published velocity was 2900-3000 fps.

[pipehand]

By the way, load was the 95 grain LEE RNFP with enough Green Dot to get 1400 fps.

You wouldn't mind sharing the overall length of that load with us, would you? I have that mold and have cast and powdercoated som boolits from it, but i havent loaded any yet. Would be using it in a PSA Dagger (Glock 19 clone) and a KelTec Sub2000. There may be loads with that light boolit that approach 2000 fps in rhe 16+ inch barrel.

[ElCheapo]

You wouldn't mind sharing the overall length of that load with us, would you? I have that mold and have cast and powdercoated som boolits from it, but i havent loaded any yet. Would be using it in a PSA Dagger (Glock 19 clone) and a KelTec Sub2000. There may be loads with that light boolit that approach 2000 fps in rhe 16+ inch barrel.

I haven't measured it, but I'm crimping the end of the case right into the crimp groove on the bullet.

[pipehand]

Thanks. Will have to experiment.

[1hole]

Took a stroll around the farm yesterday with my Sig P365XL and this guy popped up about 12 to 15 yards away. I was fortunate to make a good shot...

That's a Mess? It's good that you didn't hit center mass with that 9mm. According to well known ballistics expert Jo Brandon it would have blown the lungs outside the body ... and THAT would have made a mess to remember!

[mr surveyor]

I haven't measured it, but I'm crimping the end of the case right into the crimp groove on the bullet.

I've gotta ask .... are you crimping 9mm case mouth's into the crimp groove of the bullet?

just asking


jd

[ElCheapo]

I've gotta ask .... are you crimping 9mm case mouth's into the crimp groove of the bullet?

just asking


jd

Yep. A light crimp.

[mr surveyor]

Yep. A light crimp.

so, the cartridge isn't headspacing on the case mouth?

jd