Hornaday 38 cal. 158 grn XTP load data

[poppy42]

Hope this is the right place to post this if not mods please move to the proper location. I am hoping that someone with a Hornaday reloading manual can look up 38 special loads for 158 grain XTP Hornaday bullets. Take a picture of standard pressure and + P loads and send it to me or post it. I would greatly appreciate it!
Thanks in advance
Poppy42

[Texas by God]

PM sent

Sent from my SM-A716U using Tapatalk

[poppy42]

PM sent

Sent from my SM-A716U using Tapatalk

Thanks TbG if I can’t get data for XTP, the old data is a start.

[poppy42]

Still looking

[Kosh75287]

What propellant(s) do you plan to use?
Alliant lists 4.7/Unique/158 gr. LSWC, as max for standard pressure .38 Special. Since you are using a jacketed bullet, I might start at 4.0/Unique/158 gr. XTP and work up.
Alliant lists 5.2/Unique/158 gr. LSWC, as max for .38 Special +P. Since you are using a jacketed bullet, I might start at 4.5/Unique/158 gr. XTP.
If you are working your loads up in a .357 Magnum revolver, you have an added safety margin, and can likely directly use the Alliant data without extra reduction. It is possible that no further reduction than the usual "10% less than max" is necessary, if you are firing these in a strong and modern .38 Spl. revolver. I just don't know what you are shooting these from.

[poppy42]

What propellant(s) do you plan to use?
Alliant lists 4.7/Unique/158 gr. LSWC, as max for standard pressure .38 Special. Since you are using a jacketed bullet, I might start at 4.0/Unique/158 gr. XTP and work up.
Alliant lists 5.2/Unique/158 gr. LSWC, as max for .38 Special +P. Since you are using a jacketed bullet, I might start at 4.5/Unique/158 gr. XTP.
If you are working your loads up in a .357 Magnum revolver, you have an added safety margin, and can likely directly use the Alliant data without extra reduction. It is possible that no further reduction than the usual "10% less than max" is necessary, if you are firing these in a strong and modern .38 Spl. revolver. I just don't know what you are shooting these from.

Thanks anyway I have that info. I specifically need the data from Hornady manual for 158 grain XTP standard pressure and plus P pressure 38 specials. It’s for a project I’m working on.

[Land Owner]

HODGDON 27th EDITION







HORNADY 9th Edition

[poppy42]

HODGDON 27th EDITION







HORNADY 9th Edition

Thank you sir, just what I needed!
Poppy42