Hello Friends:
Any one cast and load for the H&k's.
Suggestions would be greatly appreciated.
Thanks
Hello Friends:
Any one cast and load for the H&k's.
Suggestions would be greatly appreciated.
Thanks
I have cast, powdercoated and shot the MP-Molds 147 HP in the PTR version of the gun with great success. Since I tend to blast a bunch at a time, I since purchase the Ibejiheads 165gr 9mm coated rounds to save time. They shoot great suppressed or unsuppressed and I can use them in my USPSA guns.
BULLET: Ibejiheads 165gr 9mm
DIA: .357
POWDER: VVN320 2.7gr
PRIMER: Federal SPP
BRASS: Mixed Range
OAL: 1.44
CRIMP: 0.379
FPS: 789
POWER FACTOR: 130
Last edited by Meatpuppet; 06-20-2022 at 09:04 PM. Reason: "More Gooder" Readability
Alcohol Inventory Reduction Specialist (Journeyman Level)
I shoot 147g (150g actual) PC in front of 4.5g PP. Can go up to 5g but wants to stay sub consistently.
Cycles fine & minimal build up on my Griffin R9 can
...Speak softly & carry a big stick...
Thanks for the replies.
primerhead
I cast boolits for and load 9mm Luger ... but my main pistol is a Walther P-38 !
No direct experience with H&K's
What's your questions ... I'll be glad to try and help !
Gary
Certified Cajun
Proud Member of The Basket of Deplorables
" Let's Go Brandon !"
Yes, I use a lyman 147 grain mould. With range scrap and PC mine weight about 157gr. They feed perfect and are most likely sub-sonic.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |