Has anyone found one that works. Mine is Hornet, but I suppose that if there is one that works, it would work for either Bee or Hornet.
Has anyone found one that works. Mine is Hornet, but I suppose that if there is one that works, it would work for either Bee or Hornet.
Basically you could get a length of either nylon or delrin. and a short section of brass rod about 1/4" in diameter. Drill the nylon or delrin for the cleaning rod. Then with the rod set into the action, mark where it clears the rear of the bolt opening for the brass rod and tap the hole and rod for 1/4"x20 threads per inch. Frank
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |