Reloading EverythingRotoMetals2RepackboxTitan Reloading
Load DataMidSouth Shooters SupplyInline FabricationWideners
Lee Precision
Results 1 to 2 of 2

Thread: Model 43 Winchester bore guide

  1. #1
    Boolit Buddy
    Join Date
    Jan 2015
    Posts
    274

    Model 43 Winchester bore guide

    Has anyone found one that works. Mine is Hornet, but I suppose that if there is one that works, it would work for either Bee or Hornet.

  2. #2
    Boolit Master
    Join Date
    Sep 2016
    Posts
    2,377
    Basically you could get a length of either nylon or delrin. and a short section of brass rod about 1/4" in diameter. Drill the nylon or delrin for the cleaning rod. Then with the rod set into the action, mark where it clears the rear of the bolt opening for the brass rod and tap the hole and rod for 1/4"x20 threads per inch. Frank

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check