RotoMetals2MidSouth Shooters SupplyReloading EverythingLee Precision
Inline FabricationLoad DataTitan ReloadingWideners
Repackbox
Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Thread: Long term mold storage?

  1. #1
    Boolit Bub
    Join Date
    Feb 2022
    Posts
    43

    Long term mold storage?

    I’ve cranked out around 1500 30-30 bullets on my Master Caster. It makes bullet production so easy. Anyway, I won’t need this mold again for at least a year. When I used LBT aluminum molds I didn’t worry about corrosion. My Accurate molds are iron. I’ve been keeping them in my safe with a golden rod, but is there something folks are doing for long term storage? Oil?
    Matt

  2. #2
    Boolit Master gc45's Avatar
    Join Date
    Jul 2015
    Location
    wash
    Posts
    522
    Applying oil is not necessary if molds are kept dry and free of moisture. Some may disagree as it may depend on our area of the country and humidity levels.. Here, I kept molds in a wood box in my reloading room that is heated to 65 degrees and have never has an issue over all the many years of using them. Many of my molds are from the 1800's, belonged to my Grandfather and my Father before me and are still making great bullets..

  3. #3
    Moderator Emeritus


    georgerkahn's Avatar
    Join Date
    Sep 2013
    Location
    South of the (Canada) border
    Posts
    3,051
    For what it is worth, I'm a bit OCD, and spray my mould first with G96. I used to store them long-time with a cast bullet in each cavity, but too many sages (bion, I do "listen" on (rare ) occasion) suggested this being of no benefit. I then put mould in a plastic Plano box to which I have dropped in about a teaspoon of (uncooked ) white rice. To finish it off, I place a piece of VPN paper atop it. I've taken out Lyman, Lachmiller, and RCBS moulds -- along with my cherished Hensley & Gibbs -- some, after more than ten years storage -- and they look as good as the day I put them away. As a btw, also, I keep them in a closet in my unheated ('cept when reloading) room in basement -- with general temps varying from the mid to high 30*sF to mid 70*sF in summer. Cement floor and cement block walls -- ambient humidity is generally (as read from a gauge I have) in the 32% to 40% range.
    This has worked for me....
    geo

  4. #4
    Boolit Master

    alamogunr's Avatar
    Join Date
    Mar 2005
    Location
    Tennessee
    Posts
    4,509
    See if your pharmacy will save some of the desiccant caps that come with bulk drugs. My son is a pharmacist and manages a pharmacy that supplies nursing homes and assisted living facilities. They throw out a bunch of these things. I usually put 3-6 in a plastic container along with one or two iron molds(depends on cavities). Since the desiccant caps are small, I usually replace them after about 6 months.

    If you can't do this, look for crystal cat litter. It works also. I made a giant desiccant container for my safe from a one pound coffee can by punching many holes and lining the can with screen wire. This can be restored by putting it in a 250º oven which I do about once every 6 months.

    These measures seem to work here in humid West Tennessee. I've yet to convince myself that a golden rod is sufficient by itself.
    John
    W.TN

  5. #5
    Boolit Grand Master

    Join Date
    Oct 2009
    Location
    England,Ar
    Posts
    7,687
    I spray mine with whatever flavor of oil that I use on my guns, wrap them in an oily rag and store them in a large Plano Dry Box. Over kill? Maybe, but they remain rust free.

  6. #6
    Boolit Master
    Join Date
    Dec 2018
    Location
    Capital Region NY
    Posts
    680
    I coat with mineral oil and store. It comes off easily with Dawn soap water and a toothbrush .
    Then they go on a hotplate for use

  7. #7
    Boolit Master
    Join Date
    Apr 2016
    Location
    NC
    Posts
    2,862
    Sealed in a 7mil poly bag with a CVI tab. Probably overkill, but I don’t want to have to clean them.

  8. #8
    ADMIN



    HATCH's Avatar
    Join Date
    Sep 2008
    Location
    Lexington, SC
    Posts
    6,700
    I use synthetic 2cycle oil and put them in a thick walled ziplock (Uline)
    Don't like being hammered by the Cast Boolits Staff, then don't be a nail.
    The rules are simple to follow.

  9. #9
    Boolit Master
    Join Date
    Jan 2013
    Location
    sw pa
    Posts
    893
    i have molds that have not been used in 30 years. after last cast;they were wrapped in vpi paper and are stored in 50 cal. ammo can. they are still clean NO OIL of any kind...............

  10. #10
    Boolit Grand Master

    gwpercle's Avatar
    Join Date
    Sep 2011
    Location
    Baton Rouge, Louisiana
    Posts
    9,251
    Before putting away I have started spraying my moulds with Dry Lubricant ... the can I have is Liquid Wrench #L512 which contains Cerflon particles ... which I believe is micro-Teflon .
    Spray on and let it dry the teflon coating stops rusting ( I'm in Louisiana) and acts as a mould release and mould lube . They used to make a 4 oz. liquid version in a squeeze bottle , which I also like and apply the liquid dry lube with a Q-Tip to the cavities when I need a mould release . It only takes a few seconds to dry I'm sure any Dry Lube that's Teflon based would work ...
    The good part is it doesn't contaminate the cavities and it doesn't need to be removed .
    Works great on top and underside of Sprue plate and on top of blocks ...lead doesn't stick to teflon coated metal .
    Really amazing stuff to use when casting ...spray pot sides , casting ladle ...any place you don't want lead to stick to .
    Gary
    Last edited by gwpercle; 05-15-2022 at 08:58 PM.
    Certified Cajun
    Proud Member of The Basket of Deplorables
    " Let's Go Brandon !"

  11. #11
    Boolit Master
    Join Date
    Mar 2011
    Posts
    779
    i have moulds that get used once a year that i oil and and use a food sealing machine to suck all air out

  12. #12
    Boolit Buddy
    zarrinvz24's Avatar
    Join Date
    Jul 2012
    Location
    Heart of the Lowcountry, SC
    Posts
    454
    Polygunbag sells a vci treated bag for storing magazines. This is what you want.

  13. #13
    Boolit Master
    Join Date
    May 2012
    Location
    Outside Rolla, Missouri
    Posts
    2,170
    I just put them back in the box they came in with whatever that paper is. Or, I have a cheap, StackOn roll away tool box I keep a bunch of molds in the drawers with nothing. I've never had any rust problems and it's plenty humid here in the Ozarks. They are all in the basement which is climate controlled so I expect that makes the difference. I think where they're stored; detached shop, non-climate controlled building/room or in your heated and cooled house makes more difference than how but, it NEVER hurts to be careful with them.
    "In general, the art of government is to take as much money as possible from one class of citizens and give it to another class of citizens" Voltaire'

    The common virtue of capitalism is the sharing of equal opportunity. The common vice of socialism is the equal sharing of misery

    NRA Benefactor 2008

  14. #14
    Boolit Grand Master
    Ben's Avatar
    Join Date
    Apr 2005
    Location
    Cleveland, AL
    Posts
    9,255
    I can clean oil from a mould easier than I see a nice mould ruined with rust / corrosion.

    Ben

  15. #15
    Boolit Bub
    Join Date
    Feb 2022
    Posts
    43
    Thanks all for the suggestions. It’s quite humid here in Southwest Ohio too, but it seems as long as you don’t do something stupid, they will likely be fine.

    I’ll probably spray them with oil only so my OCD won’t make me worry about them.

    Thanks!
    Matt

  16. #16
    Boolit Grand Master


    GregLaROCHE's Avatar
    Join Date
    Feb 2018
    Location
    Southern France by way of Interior Bush Alaska
    Posts
    5,286
    All my molds get sprayed with Ballistol after each use and are stored together inTupperware type boxes. I don’t really think about the next time I will be using a mold, but many haven’t been used for a couple of years and are still in great shape. Both aluminum and steel.

  17. #17
    Boolit Master

    Join Date
    Dec 2014
    Location
    UPSTATE new york
    Posts
    1,722
    i put therm/store them in GI 50 cal ammo cans. I use some desiccant packs. Never oil them, never.... and never had any problems. Thats a couple hundred molds over 50 odd years. why make more work for yourself.

  18. #18
    Boolit Buddy varmintpopper's Avatar
    Join Date
    Jun 2005
    Location
    cental calif
    Posts
    237
    Quote Originally Posted by gwpercle View Post
    Before putting away I have started spraying my moulds with Dry Lubricant ... the can I have is Liquid Wrench #L512 which contains Cerflon particles ... which I believe is micro-Teflon .
    Spray on and let it dry the teflon coating stops rusting ( I'm in Louisiana) and acts as a mould release and mould lube . They used to make a 4 oz. liquid version in a squeeze bottle , which I also like and apply the liquid dry lube with a Q-Tip to the cavities when I need a mould release . It only takes a few seconds to dry I'm sure any Dry Lube that's Teflon based would work ...
    The good part is it doesn't contaminate the cavities and it doesn't need to be removed .
    Works great on top and underside of Sprue plate and on top of blocks ...lead doesn't stick to teflon coated metal .
    Really amazing stuff to use when casting ...spray pot sides , casting ladle ...any place you don't want lead to stick to .
    Gary
    I believe Teflon gives off poison gas when heated, Be careful !

    Good Shooting

    Lindy

  19. #19
    Boolit Buddy
    Join Date
    Apr 2005
    Location
    Adna, Washington
    Posts
    288
    The past few years after finding rust on one of my molds.

    When done casting I clean really well and then take a acid brush and coat the cavity's, and bottom of the spure plate/top of mould with a thin film of RIG grease.
    Then a rubber band around the mold and put away in a steel ammo can in my heated shop.

    My 2 cents worth
    JW

  20. #20
    Boolit Master


    Walks's Avatar
    Join Date
    Jun 2016
    Location
    SoCal
    Posts
    3,028
    When I was a kid, My Dad used to dip molds into a can of 30w. Then wrap in tin foil. I prefer to just store them in the safe next to the dehumidifier bar.
    I HATE auto-correct

    Happiness is a Warm GUN & more ammo to shoot in it.

    My Experience and My Opinion, are just that, Mine.

    SASS #375 Life

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check