Was gifted a WW2 bring back drilling, it has lived its post war time in several closets. In very usable shape, locks up solid and bores are shiny. 16 gauge, 2.5 chambers ( imp. cyl. right barrel and imp. mod. in the left). 8x72r rifle barrel, slugged at .323. Barrels are 21.75 inches long and are stamped Nitro.Barrels also have pop up iron sites, and provision for scope mounts.Wood is dark, with a nice grain showing on the butt stock, has a 4 rnd ctg trap. Well used but nice looking overall. I am going to return it to life,and introduce it to my game woods. Any advise on loading - was recommended to me to use 32/40 ballard/winchester loads as a starting point, want to load a 180-200gr cast flatpoint at sub 2000fps. Have a partial box of factory lead bullet loads that fit the gun, I will save them to stay with the gun, they are 2,55gr full wadcutters ( box marked RWS sinoxid). Any info will be useful. Thanks Danny - will try to get up pictures this weekend.