and need a little advice. I mounted my new to me LAM II for the first time and sized and lubed enough bullets to run most of the old lube out of the reservoir. I learned a bit about adjusting the pressure on the lube handle and how to adjust the depth of bullet travel so all in all a good first day.
Now the question, which lube to use. I am currently and for the foreseeable future (we all know how that works out) will only be sizing Keith SWC bullets. I would anticipate velocities up to around 1200fps but mostly 1000fps. What I have on hand is RCBS lube, SPG and Lyman Alox. Is there a reason to choose one of these over the other two?
Any help is appreciated.