Nice looking bullet! I would start out letting my magazine be my guide. Load one or two dummy rounds and see for sure that they will load and feed from your mag and feed into your chamber. With that long pointy bullet nose, you will be limited as to how you seat the bullet into the case. Too long will be a problem, and you surely don’t want to go any deeper than necessary as interior volume will decrease and pressures will rise.
Froggie
"It aint easy being green!"
What Green Frog said plus pass the plunk test.
try 1.10" to start. You may find that you need to shorten the OAL a bit, but I suspect that somewhere between 1.065" and 1.10" you will find your happy place.
_________________________________________________It's not that I can't spell: it is that I can't type.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |