This mold is from a Group Buy that shipped 2-3 years ago. The mold has no hollow point, no lube grooves, no gas check, and is intended to be coated with HiTech polymer or powder coating. The nose on this design is bore ride diameter (.300”) just behind the point, then narrows through the body until it comes back up to .311” behind the crimp groove.
Looks like Miha has this mold in stock and on sale, $88, plus shipping!!! No dimensions, but a good view of the shape.
https://www.mp-molds.com/product/mp-...e-multichoice/
Honestly, I only cast 200-300 boolits from this mold. I was trying to create some subsonic practice rounds, but my AR gave me nothing but trouble with feeding. After powder coating, the bore ride was too big and would get stuck in the rifling before going into battery. I didn’t try to make this work with any other caliber, and have moved on to a simpler NOE design.
So here’s an opportunity for someone else to enjoy this mold!! I will sell this mold for $70, plus shipping. The first to respond with “I’ll take it” in this thread will get the mold. Payment by green money, USPS Money Order, or personal check will be OK. Shipment to US addresses only. PM with info after claiming.