I have TWO presses For Sale; both are RCBS Big Max (A4) presses. Both have only 1 shell plate for the top of the ram, and each is different. For ease of identification, I’ll use the serial numbers for description and photos… I’ve had A4’s for almost 10 years, and just don’t use them. Time for someone else to get some enjoyment from them. These presses sell for $400+, but I’ll sell these for $350 each, plus freight. To claim one, post “I’ll take number <XXXX>” (include the serial number), then PM me so we can exchange addresses for payment/shipping.
Both presses SPF
2610
This press has the spring-loaded shell plate. It accommodates multiple case head sizes. Common rifle sizes (308, 30-06, 300 WinMag) up to rimmed cases like 30-30 will all fit in the spring-loaded jaws. Small rifle sizes like 223 Remington are too small for the jaws to grab the case head. Also, cases with large rims like 7.62x54R are too large to fit. This press has a small nick on the finish, just above and left where “RCBS” is cast in the front of the press. It also has marks on both of the legs going down to the handle base, where an attachment pin has rubbed against the finish. Both marks are clearly shown in the photos.
2641
This press has the ram adapter that allows standard RCBS (and others) shell holders for different calibers to snap into place. This press has no nicks or scratches that I could see. It also includes the original box and instructions, though none of the extra small parts.