I'd like to find one. I had used FC60's press for reforming 32s into a useful thing.
They are a roughly 10" long hexagon with a ram but they don't seem to be marked in any manner. Anyone have one?
I'd like to find one. I had used FC60's press for reforming 32s into a useful thing.
They are a roughly 10" long hexagon with a ram but they don't seem to be marked in any manner. Anyone have one?
I have one that I got from a member here with an assortment of dies.
Simple press and dies are easy to make for pistol bullets without an ogive.
I think that CH made a press that used similar dies.
I have one that I converted to make .224 bullets using 22 rimfire cases. I scaled up that design and made a press capable of swaging any reasonable size jacketed bullet. I use it for .375 and .416 using tubing or brass cartridge case jackets. IIRC I used 38 special cases for the 375 and 30-30 for the 416. Makes a cheap practice bullet.
BIG OR SMALL I LIKE THEM ALL, 577 TO 22 HORNET.
yes, i have one but no dies.....
a repurposed Mosin-Negant Hex receiver???
“Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem.” Ronald Reagan
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |