While on a clean and organize mission deep in the bowels of my cave ( this happens about 1 per 10 years ) I stumble across this titled press. I have 2 shot bushing for it and 1 powder. I do not remember exactly how it jumped into my possession . I faintly remember a trade. I am almost certain I never actually used it.
Sooooooooooo it is so filthy and even has some powder in one tube and shot in the other. Tear it all apart and it now shines. With the exception of the plastic powder and shot hoppers. Anyway put it all back together and load about 10 shells with it. To my surprise I actually like working with it. Some of my wife's fussiness must be rubbing off on me.
The real importants things it works and does a beautiful crimp job on the 20 gauges I loaded. The discolored shot/powder bins are bothering me why ? Anyway decide it is 2 " OD plastic tube 1-7/8" ID x 14 inches long. Which I think I am going to shorten up some.
As far as parts mainly powder bushings I understand Posness Warren bushing will work in this press. The one I have might be all I need studying the manuals for what I want anyway. The bins are harder to find than what I anticipated though. The ID is not that critical but trying to buy what you want is.
I can find the material I need to fabricate what I need trouble is most places will only sell a minimum of so many feet.
Most places 4 foot is the minimum. Which would be ok but then the shipping charge is way high cause of length.
Anyone got idea where to look ? Flea bay has some pieces that may work already cut to what I can use, but prices seem high to me