Anyone load with H4198?

[toallmy]

If you could possibly post some pictures of the wooden barrels it would be appreciated .

[dh2]

I use it for 444 Marlin and 45-70 as well as many bottle neck rifles for cast bullet loads

[Tazman1602]

444 Marlin and 45-70, GREAT accuracy!

Art

[Cosmic_Charlie]

Just got a couple pounds for the 45-70. Worked nicely.

[fatnhappy]

h4198 worked well for me in 7.62x39. It's a stick powder, but it seems to meter okay.

Same. I'm using it in the 7.62 x 39 with the 311291 in my mini30

[guzma393]

Same. I'm using it in the 7.62 x 39 with the 311291 in my mini30

I've never tried h4198 in a mini 30 before. How's the performance?

Sent from my Moto G (5) Plus using Tapatalk

[fatnhappy]

I've never tried h4198 in a mini 30 before. How's the performance?

Sent from my Moto G (5) Plus using Tapatalk

It works quite well for my purposes. 18.5 grains and 311291
I wanted a plinking CB load that fed (hence the round nose) and a powder that filled the case as much as possible while cycling the action with the OEM gas block. cases are only being tossed a couple feet. Accuracy is mini-30 acceptable.

I'm too cheap to buy the custom gas block or the smaller diameter gas bushings.

[Bnt55]

I would be interested in seeing pictures of these wooden powder casks as well. What a cool find!

[kenton]

This is an old post but a lot of load data here. Use the drop down menus under the pictures on the right.

https://shop.hodgdon.com/hodgdon/hod...194.1637765153

[badguybuster]

I use it in 45-70 for full power loads, 223 and 308. Its good.powder