A friend asked me to look at his old Lee Pro 1000. He’s pretty handy but can’t make it work. He gave it to me but I can’t make it work either. All my stuff is Lee ( 3 LPK ) so I’ve done my years of scratching my head.
When the machine is cranked the carrier will not go fully to the bottom meaning the shell plate is short of the correct position. The screw adjustment underneath does nothing. Then I noticed the drive bolt was longer by about 1/2 inch. Odd. Tried one of mine. No good. Bought a new drive bolt carrier. It’s a different fit and longer than the old one. It’s obviously an older machine but all else looks good including the nylon cogs order the carrier. Hope the pics load.
Any ideas.
Sorry pics won’t load