First outing with my Rifle boolits

**Helka** · 11-12-2021, 11:57 AM

So i had bought a box of Commercial Cast DRG 30 cal 308 boolits a few months ago. At 25 yards i was getting 2-3 Foot groups, no lie. They mic'd at 308 so my guess was they were tumbling down the barrel. I acquired an RCBS Iron 2 cav 180gr mold from auction. I made about 190 boolits. I PC'd and GC'd them. I wasn't sure what to expect from them but here is the result at 100 yards. Keep in mind i haven't down a load work up yet. I will also be looking at getting some unique powder because if i can replicate these results at a third the powder charge i'll be laughing.

Click image for larger version.

Name: Target.jpg
Views: 44
Size: 36.3 KB
ID: 291604

**Thumbcocker** · 11-12-2021, 12:38 PM

Looks like you got a winning combination. Congratulations.

Sent from my SM-G960U using Tapatalk

**Helka** · 11-12-2021, 01:20 PM

Originally Posted by Thumbcocker

Looks like you got a winning combination. Congratulations.

Sent from my SM-G960U using Tapatalk

Thanks, i'm looking forward to doing a load development and trying Unique powder

**45-70 Chevroner** · 11-12-2021, 03:43 PM

Unique is my favorite cast boolit powder. 10 gr. is almost a standard load for most rifle calibers, at least for 30 cal to 35 cal. Even for my Ruger 45 Colt and my S&W 44 mag. It has a tendency to not measure well through a powder measure in humid states. It is quite dry here in Arizona.

**The Dar** · 11-12-2021, 10:09 PM

Nice group for beginning to work up a load, congrats. I'm finding that Alliant Reloder 7 is working well in most of my cast rifle loads. Down to less than half a pound, wish I could find more.

**Helka** · 12-01-2021, 01:04 PM

So I just back from the range. Did a 3 shot group using Unique. Did 9,10,11 and 12 grains.

9 did the best group

Sent from my iPhone using Tapatalk

**W.R.Buchanan** · 12-01-2021, 01:26 PM

Try 16 gr of 2400. That is one of the standard 30 cal. cast boolit loads. I use it alot with 311299 200 gr boolits.

Randy

**Helka** · 12-01-2021, 01:28 PM

I will take a look. I did shoot my D4895 at 32gr and got this 5 shot grouping. Under 1”

Sent from my iPhone using Tapatalk

**SSGOldfart** · 12-01-2021, 01:53 PM

You might try "The Load" 13grn of Red Dot for a mild shooting load.
Nice group you might just stay there

**dondiego** · 12-04-2021, 07:36 PM

You might want to revisit that 10 grain group. Try 9.5 grains and thereabouts.

**Helka** · 12-04-2021, 07:38 PM

I was going to focus on both 9 and 10. Two holes in the same in 10 had me excited.

Sent from my iPhone using Tapatalk

**gwpercle** · 12-04-2021, 07:47 PM

Originally Posted by Helka

I will take a look. I did shoot my D4895 at 32gr and got this 5 shot grouping. Under 1”

Sent from my iPhone using Tapatalk

Whatever you do ...don't loose this load . It don't get much better than 5 shots UNDER 1" !!!
Keep looking and testing ... but that group isn't bad at all ...!
Gary

**Helka** · 12-04-2021, 07:50 PM

Originally Posted by gwpercle

Whatever you do ...don't loose this load . It don't get much better than 5 shots UNDER 1" !!!
Keep looking and testing ... but that group isn't bad at all ...!
Gary

Thanks. I was really happy with that. Going out Wednesday back to the range to do a few more loads of the unique 9-10 grains and then try 32 of D4895 maybe 3-5 shot groups and see how they perform. I will update on Wednesday.

Sent from my iPhone using Tapatalk

**Thumbcocker** · 12-04-2021, 08:14 PM

How does D4895 compare to IMR4895?

Sent from my SM-G960U using Tapatalk

**Helka** · 12-04-2021, 08:16 PM

Originally Posted by Thumbcocker

How does D4895 compare to IMR4895?

Sent from my SM-G960U using Tapatalk

I’ve never used IMR4895 but for the D version it states to use IMR’s data less 10%. I don’t have a chrono yet so I can’t say how fast I’m pushing 32 gr at.

Sent from my iPhone using Tapatalk

**charlie b** · 12-04-2021, 09:10 PM

You've got some good groups to start with. Is that the 'pointy' RCBS bullet? If so it is known to be an accurate bullet.

What is the twist rate of your rifle, 1-12?

**Helka** · 12-04-2021, 09:12 PM

Originally Posted by charlie b

You've got some good groups to start with. Is that the 'pointy' RCBS bullet? If so it is known to be an accurate bullet.

What is the twist rate of your rifle, 1-12?

1:12 yes. Here is a loaded round.

Sent from my iPhone using Tapatalk

**Helka** · 12-08-2021, 02:12 PM

Just got back from the range. Some things to note. It was snowing and -5 Celsius. Was having some issues getting a bead on the targets because of the snow.

I did a load of unique to hone and it came out that 9gr was the best for my rifle.

1.227” 5 shot group at 100 yards

Sent from my iPhone using Tapatalk

**dearslayer** · 12-09-2021, 07:41 AM

Originally Posted by Helka

Just got back from the range. Some things to note. It was snowing and -5 Celsius. Was having some issues getting a bead on the targets because of the snow.

I did a load of unique to hone and it came out that 9gr was the best for my rifle.

1.227” 5 shot group at 100 yards

Sent from my iPhone using Tapatalk

That's a pretty good group. Nice shooting.

**Forrest r** · 12-09-2021, 08:45 AM

WOW!!! Nice reloading/shooting.

Interesting that those loads are so different but yet group the same. The 4895 load should be +/- 700fps faster and have +/- 10,000psi more pressure.

Makes me wonder in both loads short pressures are close to being the same????

BP	Bronze Point	IMR	Improved Military Rifle	PTD	Pointed
BR	Bench Rest	M	Magnum	RN	Round Nose
BT	Boat Tail	PL	Power-Lokt	SP	Soft Point
C	Compressed Charge	PR	Primer	SPCL	Soft Point "Core-Lokt"
HP	Hollow Point	PSPCL	Pointed Soft Point "Core Lokt"	C.O.L.	Cartridge Overall Length
PSP	Pointed Soft Point	Spz	Spitzer Point	SBT	Spitzer Boat Tail
LRN	Lead Round Nose	LWC	Lead Wad Cutter	LSWC	Lead Semi Wad Cutter
GC	Gas Check

Thread: First outing with my Rifle boolits

Thread Tools

First outing with my Rifle boolits

Posting Permissions