22 tmc ?

[Johnch]

I have a idea
But I am not sure if or how well it would work
I don't want to convert a Glock to fire the 22 TMC

Will the 22 TMC feed out of a Glock 17 Mag ?
I know it is based on a shortened 5.56
I also read that the 22 TCM with a deep seated bullet will work in a Glock Mag
But I don't 100% trust everything posted on the internet
So I check myself or ask people that have the brass and mags

Don't have any 22 TMC ammo or brass to try it in one of my Glock mags

As I am drawing up a bolt action 9 MM Luger carbine
I am planning on using a barrel nut like a Savage rifle to hold the barrel on
I also plan on using Glock mags in the carbine


So I had the idea to have a extra barrel in 22 TMC if it really would work
That way I could work up some plinking and short rang hunting loads
That is if I can get the extractor to grab the smaller case

Thanks
John

[Ithaca Gunner]

They claim about all you need is a barrel swap. They can be found on e-bay from time to time. I never got one because another cartridge to ''play with'' is just what I don't need, but from videos I've watched, it looks like a fun cartridge. RIA makes the kits and they're fairly reasonable as to cost, they may also be the sole source of ammo and cases too though, I'm not sure.

[matrixcs]

fyi: the 22tcm comes in 2 versions. the standard cartridge is made to feed from a 38super magazine and the other feeds from a 9mm magazine...it uses a shorter rounder projectile than the standard bullet.

love my 22tcm 1911....

[Ithaca Gunner]

fyi: the 22tcm comes in 2 versions. the standard cartridge is made to feed from a 38super magazine and the other feeds from a 9mm magazine...it uses a shorter rounder projectile than the standard bullet.

love my 22tcm 1911....

Thanks, I was wondering what the .22 TCM9R was, that's the one used for the Glock 17.

[Handloader109]

Actually, the original will feed 9mm and 22tcm from same magazine, but they are really 38 super magazines, at least the mecgar magazines I use in the 1911. The glock conversion uses the slightly shorter bullet 22tcm 9R. it is round nose rather than tapered. Both will shoot out of a 1911.
The top cartridge is the 9R. 1.125 OAL.
the second down is the original 22tcm 1.250 OAL.
third down is my altered Bador mold. 1.230 OAL.
And bottom is a 37 grain NOE 1.250 same oal as original.
The longest 9mm I've seen listed is 1.169 Not sure what would be max out of a glock magazine. Obviously shorter than 1.250.... My guess putting these in a 9mm g17 mag is that probably 1.125 is about as long as you can go. The cast can most probably be pushed in that much....

If you need a few to try of the cast, let me know. I PC them and no leading at 2000fps

Sent from my SM-G892A using Tapatalk

[gkainz]

I have .22TCM and 9mm barrels for a 1911, which uses a .38 super mag. Doesn’t help you for Glock but just another datapoint.
Greg

[Johnch]

Thanks !!

Now I know it will feed

But knowing that will cause me more work
As now when I start making parts
I will have to turn a extra barrel down LOL

John