H&R stock swap

[jeffsmith13]

Good afternoon,
I have a H@R 45-70 single action rifle with the handi-grip thumbhole stock. I would like to swap it out for a wood or laminate wood stock. Will the HR/NEF single shot shotgun stocks fit . I see them for sale on the online bidding sites, or I could buy a Boyds.

[RustyReel]

Yes, should fit. You will need the longer bolt and washer for the traditional style stock.

[jeffsmith13]

Thank you!!

[smithnframe]

How does it kick with that thing you have on it?

[jeffsmith13]

Full power or subsonic are both like shooting a 20 gauge birdshot load. The suppressor is a Lane Scorpion 458 titanium, takes about 40% of the recoil away

[Mk42gunner]

The H&R that I built a new buttstock for used a 3/8-24 thread for the stock bolt. My drilling wasn't quite centered, so I used a piece of all thread and a lock nut to give a bit more strength through the wrist.

Robert

[jeffsmith13]

I hope to get wood stock , I don’t really like plastic on a rifle.

[Texas by God]

Look for a Pardner single shot shotgun to swap stocks with. The barrel channel might need work but maybe not. Then cut the shotgun barrel to 18.5 inches and have a tacticool shotgun!

Sent from my SM-A716U using Tapatalk

[jeffsmith13]

Do the sb1 and sb2 receivers use the same stock bolt? I may have found a replacement but it doesn’t have a bolt.
Thanks

[jeffsmith13]

I answered my own question, swapped a 410 stock to my 45-70 and everything fit fine, now to order another wood set