Inline FabricationRotoMetals2Reloading EverythingLoad Data
MidSouth Shooters SupplySnyders JerkyLee PrecisionRepackbox
Titan Reloading Wideners
Page 1 of 2 12 LastLast
Results 1 to 20 of 27

Thread: Small buck down

  1. #1
    Boolit Buddy
    Join Date
    Aug 2014
    Posts
    184

    Small buck down

    So this year I picked up a Henry single shot .357 mag rifle. I thought it had nice wood. Went out to one of my local haunts for a doe and found a small 4x4 mule deer buck instead. Couldn't pass up a 100 yard shot. First shot was at 109 yards and got both lungs, it took a few steps and I reloaded and shot again, center punched the heart at 120 yards. 162grn Cast G/C swc, 14.5grns IMR 4227, for about 1500fps.
    Click image for larger version. 

Name:	Henry 357.jpg 
Views:	63 
Size:	33.7 KB 
ID:	290923
    Click image for larger version. 

Name:	2021 MD 1.jpg 
Views:	73 
Size:	127.7 KB 
ID:	290924

  2. #2
    Boolit Master 444ttd's Avatar
    Join Date
    Jun 2019
    Location
    PA
    Posts
    1,011
    nice!!!!!
    Ad Reipublicae his Civitatum Foederatarum Americae, ego sum fortis et libero. Ego autem non exieris ad impios communistarum socialismi. Ora imagines in vestri demented mentem, quod vos mos have misericordia, quia non.

    To the Republic of these United States of America, I am strong and free. I will never surrender to godless communist socialism. Pray to images in your demented mind, that you will have mercy, because i will not.

    MOLON LABE

  3. #3
    Boolit Master Thumbcocker's Avatar
    Join Date
    Oct 2007
    Location
    East Central Illinois
    Posts
    4,510
    Nice rifle and buck

    Sent from my SM-G960U using Tapatalk
    Paper targets aren't your friends. They won't lie for you and they don't care if your feelings get hurt.

  4. #4
    Boolit Bub
    Join Date
    Sep 2020
    Posts
    53
    Nice shooting, did you get pass throughs?

  5. #5
    Boolit Buddy
    Join Date
    Feb 2010
    Posts
    213
    Nice. Shoot until they are down.
    Steve

  6. #6
    Boolit Buddy
    Join Date
    Aug 2014
    Posts
    184
    Both bullets got complete penetration.

  7. #7
    Boolit Buddy
    Join Date
    Dec 2009
    Location
    Ball Ground, GA
    Posts
    416
    Not only nice but outstanding with iron sights. Would like to hear more about your zero yardage as well as "legendhunter"s question. Is your sight set up with a bead front or post? Proof you don't need 2000+ fps.
    Great job!
    Tony

  8. #8
    Boolit Buddy
    Join Date
    Aug 2014
    Posts
    184
    I could tell the first shot was good. The deer acted confused and wasn't moving very fast, but at 100 yards, with a 357 carbine on a lung shot. I thought he may walk a bit further than I would like and the second shot was a nice broadside. I figured I didn't have much to lose putting another in him. Heart shot seemed to have dumped him in short order. He would have gone down from the lung hit, but with the lack of energy, it would be like an archery shot and he could have gone a ways and may not have presented me with a clean follow up at that point.

  9. #9
    Boolit Master
    Join Date
    Apr 2008
    Location
    Monticello, KY
    Posts
    1,738
    Dang nice buck, and purty rifle as well. I have been looking for the same .357 for over a year, and can not find one that is decent priced. Good job all the way around, fine eating right there.

  10. #10
    Boolit Buddy
    Join Date
    Aug 2014
    Posts
    184
    I'm sighted in dead on at 100, bead front sight. I'm holding on target not apple on post/6 o'clock. I don't feel great taking shots much over 100 yards with a 357 carbine, so I didn't feel I needed to sight in high. Brass bead on chest, and fire. First shot was slightly quartering away at 109 yards. I heard the "thunk" and the deer hunched up and started walking away kinda wobbly and confused. I knew the shot broke clean and he was hit well. He stopped at 120 yards and was looking rough, but was completely broadside. I figured there was no harm in a finisher, so I put the bead on the chest again. I was aiming mid chest and it connected a few inches low and center punched the heart. He tipped over instantly into some juniper bushes. First shot broke a rib on the on side, punctured both lungs and exited a rib on the off side. Second shot broke onside rib right in the armpit area and exited the same spot missing the rib on the off side. Cleanly centering the heart. If you zoom into the attached pic, you can see the bullet hole in front of my finger.
    Click image for larger version. 

Name:	2021 MD 4.jpg 
Views:	49 
Size:	56.3 KB 
ID:	290932
    Attached Thumbnails Attached Thumbnails 2021 MD 2.jpg  

  11. #11
    Boolit Buddy
    Join Date
    Jul 2008
    Location
    Missouri
    Posts
    174
    Sweet, I've taken a few with my .357 with 175 gr flat point gc and it did the job just fine.

  12. #12
    Boolit Buddy
    Join Date
    Dec 2009
    Location
    Ball Ground, GA
    Posts
    416
    Again good shooting. If a man knows his dope with a bead sight that is a deadly and fast combination. Also good to see the results and know the boolit speeds. Good REAL world information, thanks for posting and the Q&A.
    Tony

  13. #13
    Boolit Buddy
    Join Date
    Aug 2014
    Posts
    184
    My pleasure. I was confident I could put shots on target from 0 to 100, I wasn't super worried about 109 or 120. But I think that's my limit. Marginal hits at range would probably give me disappointing results more often than not.

  14. #14
    Boolit Buddy badguybuster's Avatar
    Join Date
    Oct 2013
    Location
    West (By GOD) Virginia
    Posts
    322
    Outstanding

  15. #15
    Boolit Master

    Hogtamer's Avatar
    Join Date
    Mar 2013
    Location
    East central GA, Appling near Augusta
    Posts
    3,311
    Attaboy!
    "My main ambition in life is to be on the devil's most wanted list."
    Leonard Ravenhill

  16. #16
    Boolit Buddy
    Join Date
    Aug 2014
    Posts
    184
    I really like this little rifle. Any reason to, or not to get it made into 357 max? Part of me is scared to mess with it. And says faster with lead is pointless. But a have a bit of a credit at the gun smith....

  17. #17
    Boolit Master
    farmerjim's Avatar
    Join Date
    Nov 2012
    Location
    St. Francisville, Louisiana
    Posts
    1,926
    Quote Originally Posted by wolfdog View Post
    I really like this little rifle. Any reason to, or not to get it made into 357 max? Part of me is scared to mess with it. And says faster with lead is pointless. But a have a bit of a credit at the gun smith....
    I turned my 357 mag Handi rifle into a 357 Max. It shoots great, especially with 200 grain boolits.
    There is no difference between communism and socialism, except in the means of achieving the same ultimate end: communism proposes to enslave men by force, socialism—by vote. It is merely the difference between murder and suicide. Ayn Rand

  18. #18
    Boolit Master
    Join Date
    Apr 2009
    Location
    northern Minn. in the boonies
    Posts
    2,178
    If i could find a Henry SS in 44M like what you have. I would buy it in a heartbeat.

  19. #19
    Boolit Master
    Join Date
    Mar 2005
    Location
    La.
    Posts
    899
    Most excellent wolfdog! That's good shooting with a pretty rifle and a good buck on the ground.

  20. #20
    Cast Hunter

    RugerFan's Avatar
    Join Date
    Mar 2005
    Location
    East GA
    Posts
    2,130
    Excellent! Well done sir.


    Sent from my iPhone using Tapatalk Pro
    Boone and Crockett Club member
    <<----------------<<<<<<
    Pope & Young Club member


Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check