209 primers in stock

[nickyc]

Just a heads up to you guys, ballistic products just listed cheddite 209 primers in stock a few minutes ago. Good luck

[6pt-sika]

I was on another forum and was told they were in stock . I’m flush with 209’s but I ordered 5,000 more . Keep them dry and they certainly won’t go bad . Just wish all the Chedditte’s I have were Winchesters lols !

[Kylongrifle]

I was just joking earlier that something would come in stock today since I had to empty my card on an unexpected bill. Havnt had time to get to the bank today... Of course they become available,LOL

[6pt-sika]

I think I’m going to come into a several eight pounders of powder in the next week or so . If the deal works out the only thing I’ll need for the next several years will be shot and perhaps a case or two of 12 and 20 gauge CB wads . Wads wise I’m in great shape for the 8’s the 10’s the 16’s the 28’s and 410’s . And to be honest I’ve got a good supply of 12 and 20 wads I just seem to go thru them quicker .

[Agent1187]

Just wanted to say

A) thanks for the heads up.

B) 24 hours later, they still are listed as in stock!

I am down to my last few hundred Winchesters, so its going to be time to switch over for the next couple years until the shortages pass.

Sent from my SM-S115DL using Tapatalk

[6pt-sika]

Just wanted to say

A) thanks for the heads up.

B) 24 hours later, they still are listed as in stock!

I am down to my last few hundred Winchesters, so its going to be time to switch over for the next couple years until the shortages pass.

Sent from my SM-S115DL using Tapatalk

You do what you’re comfortable with but I use CCI , WIN , REM and Cheddite intermittently. I’ve even let some Federal 209A’s in the mix with no problems . FWIW I’ve even used CCI 209M’s in a pinch although they were initially purchased for Knight ML’s .

[trapper9260]

How is the size of Cheddite to Fed , Win , Rem and CCI , are they bigger then the 4 I stated ?

[6pt-sika]

How is the size of Cheddite to Fed , Win , Rem and CCI , are they bigger then the 4 I stated ?

They don’t expand the primer pockets enough to make them loose with the others if that’s what you’re asking .

[Blood Trail]

Got plenty of primers. Only got a couple 1000’s of fed 209A’s. If y’all see this for sale, post it up.


Sent from my iPhone using Tapatalk

[trapper9260]

They don’t expand the primer pockets enough to make them loose with the others if that’s what you’re asking .

Yes that is it , thank you

[frkelly74]

I have a bunch of nice looking once fired Federal 12 ga empties I would like to be able to load up. My batch of Winchester 209 primers are loose in the shells when I have tried to use them. Does Federal use a different size?

[trapper9260]

I have a bunch of nice looking once fired Federal 12 ga empties I would like to be able to load up. My batch of Winchester 209 primers are loose in the shells when I have tried to use them. Does Federal use a different size?

You can get a tool from BPI that you can recondition the primer pocket on hulls. I got one and takes care of all the ones that give me problems. Here is the link of what I am talking about , but see they are now out of stock https://www.ballisticproducts.com/Un...tinfo/0740010/