Attachment 290693
26-inch thick armor from a Japanese Yamato class battleship, pierced by a US Navy 16-inch gun. The armor is on display at the US Navy Museum.
Attachment 290693
26-inch thick armor from a Japanese Yamato class battleship, pierced by a US Navy 16-inch gun. The armor is on display at the US Navy Museum.
Got a .22 .30 .32 .357 .38 .40 .41 .44 .45 .480 or .500 S&W cylinder that needs throats honed? 9mm, 10mm/40S&W, 45 ACP pistol barrel that won't "plunk" your handloads? 480 Ruger or 475 Linebaugh cylinder that needs the "step" reamed to 6° 30min chamfer? Click here to send me a PM You can also find me on Facebook Click Here.
I wonder what the power factor is for that 16" gun ?
Probably inadequate for today's armor plated deer.......
"In general, the art of government is to take as much money as possible from one class of citizens and give it to another class of citizens" Voltaire'
The common virtue of capitalism is the sharing of equal opportunity. The common vice of socialism is the equal sharing of misery
NRA Benefactor 2008
Ok but if the magazine doesn't hold 17 or more rounds it's worthless.
On the other hand if it can fire more than one round it's an "assault weapon" and should be confiscated.
Warning: I know Judo. If you force me to prove it I'll shoot you.
I always find it kind boggling how ships that heavy can float. Physics are amazing
Aw, com'on, Doug. That's hardly a handgun! Those pics sure are impressive, though, aren't they? A shell the size of a VW bug going at speed will do a lot of damage.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
And from,I don't know, 20 miles away on a moving target in rolling seas? Nice shootin' Tex!
Nice target shooting Dougguy. How much labor time is charged to throat that barrel to shoot cast boolets?
Can we get a picture of the shoulder rig for that gun?
Paper targets aren't your friends. They won't lie for you and they don't care if your feelings get hurt.
A link to the story behind that photo: http://www.byronhartshorn.com/2014/0...ship-showdown/
A photo from the other extreme: This is the impact crater from a Japanese 5" equivalent on one of the U.S.S. Iowa's turrets
I'm guessing that photo was taken before conservation efforts got underway at Iowa's current museum berth in San Pedro. The hole has a fresh coat of gray paint over it and it looks more like a casting/forging flaw or rust pit than battle damage. You'd barely notice if not for the yellow arrow and tour guide plaque.
But the funniest bit:
I'm reasonably confident a 16" HE round would cause "reproductive harm".
WWJMBD?
In the Land of Oz, we cast with wheel weight and 2% Tin, Man.
Can't imagine what that did inside the vessel.
Lets see if I remember the stats right or not.
Weight of projectile: 16"/50 cal AP is 2,700 lbs.
Initial Velocity: Not sure but 2,600-2,650 fps was fairly standard for naval gunnery. (It varies according to temperature.)
I do know the FC's used the last three days powder magazine temps to figure IV for our 5"/54.
Robert
Time to go rabbit hunting’, I guess.
"Experience is a series of non-fatal mistakes"
Disarming is a mistake free people only get to make once...
MG you forgot the BC advantage of something like 5 or 6 .
The 16" Howie on the Iowa , 1 of which I got to fondle before a slab was cut off for a little museum out in the Nevada desert , had an 80 mile range . 10-20,000 yd was chip shot ranges on standing targets .
An electronics guy that did part of the last generation targeting gear on the Iowa told me that with the Rocket Assisted projectiles they could shot 105 miles and keep the shells inside a football field grid per turret . Can you imagine ? That's the same as "a little vertical stringing but I can still cover 3 with a half dollar at 1000 yd" ...... Lots of electronics and drive motors involved . He also told me that a top gun crew in WWII could do the same consistently but only at 50 miles and they used the whole stadium . In any case it was a fair bit of shooting .
In the time of darkest defeat,our victory may be nearest. Wm. McKinley.
I was young and stupid then I'm older now. Me 1992 .
Richard Lee Hart 6/29/39-7/25/18
Without trial we cannot learn and grow . It is through our stuggles that we become stronger .
Brother I'm going to be Pythagerus , DiVinci , and Atlas all rolled into one soon .
That would absolutely ruin the hide and meat.
The solid soft lead bullet is undoubtably the best and most satisfactory expanding bullet that has ever been designed. It invariably mushrooms perfectly, and never breaks up. With the metal base that is essential for velocities of 2000 f.s. and upwards to protect the naked base, these metal-based soft lead bullets are splendid.
John Taylor - "African Rifles and Cartridges"
Forget everything you know about loading jacketed bullets. This is a whole new ball game!
I seriously doubt you could shoot cast in one of those 16 inchers. Cast and machined bronze maybe, but anything softer would just slug up upon firing, the base of the boolit would be moving before the nose moves, prolly make a helluva pressure spike, and I bet you could bulge one of those barrels if you tried!
I wonder how much freejump there is in there before the shell engages rifling?
Got a .22 .30 .32 .357 .38 .40 .41 .44 .45 .480 or .500 S&W cylinder that needs throats honed? 9mm, 10mm/40S&W, 45 ACP pistol barrel that won't "plunk" your handloads? 480 Ruger or 475 Linebaugh cylinder that needs the "step" reamed to 6° 30min chamfer? Click here to send me a PM You can also find me on Facebook Click Here.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |