Hi everybody,
I've got an old CVA Hunter bolt magnum 50 calthat I've been hunting with for the past couple of years. The thing shoots great, it'll put 3 shots into 1.5" at 75yds.
I cleaned and oiled it after last year and this year I pulled it out and the breach plug was corroded shut from end to end.
I tried BP citrus solvent and a nipple cleaning wire and couldn't get anywhere.
I had a new breach plug and put it in, so I'm good for this year.
Is there anyway to clean the flash hole out?
The smallest drill bit I have is just barely too big to fit the hole.
Also, should I oil the hole in the breach plug, then just blast it out with some brake cleaner next year?
Oh, and I'm using 777 pellets with a 209 primer.