The beginnings of a 2D floor plan to scale, based on your dimensions. As you can see there is one discrepancy in dimensions you posted.
Would be nice to know how high the case feeders are. and the mounted 750's. Also is your door width measurements the door itself or the door with casing. Best to measure to the door slab itself. Is your door really 6'11" high....I'm showing 6'8" (normal) and it barely fits under the angled ceiling.....
I squared of the bench by the entrance....I know you have it beveled but IME you will lose useful bench length if you do....I'll hack it off if you want.
Attachment 290458
If you print out the pdf it should be 1/4"= 1'-0" I will rescale the dimensions to normal for that scale (smaller) but I wanted this prelim to be easy to read.
Once the drawing is accurate, you can play with lots of options....like extending the bench even the length of the room with shorter turnouts for the presses.....I'll show you what I mean one the drawing of the room is corrected...
I bought a drafting stool that swivels and made my bench 42" high so I could have my knees go under while seated.... Even being shorter than you, I don't care for having to sit down low, ever. The stool is closer to standing height, so moving from one function to another is easier. That is especially nice as I get ancienter.