Hi
Does anyone out there have at set of the 310 handles that is for the "larger" 310 dies?
I believe these fit the 348 Winchester size cartridges.
I would like to know the diameter (ID) of the threads in the handle.
Thanks
Scott
Hi
Does anyone out there have at set of the 310 handles that is for the "larger" 310 dies?
I believe these fit the 348 Winchester size cartridges.
I would like to know the diameter (ID) of the threads in the handle.
Thanks
Scott
Scott
You can easily judge the character of others by how they treat those who they think can do nothing for them.
I've heard of these, but never encountered a set in the wild. You might check with Pressman and with Brass Magnet, and of course Rick at the 310 shop. Maybe, just maybe one of them will be able to provide the info you need.
Your Phriend the Phrog
"It aint easy being green!"
Thanks Mr Phrog, good to hear from you.
PM me, I may have few odds and ends for you, I did some more cleaning.
Any way, I believe I have two adapters for these larger dies so they can be used them in a standard press, just like the smaller 310 dies.
Scott
Scott
You can easily judge the character of others by how they treat those who they think can do nothing for them.
Lyman die sizes: Small, .381" x 30tpi; Medium, .609"x30tpi; Large, .652"x30tpi
Last edited by Pressman; 09-26-2021 at 10:03 PM.
I was going to say that if you have them in hand a simple measurement should tell you the size, or at least get you close.
Mr. Barlow must have really liked 30 TPI, it shows up a lot in his tools.
Robert
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |