I have a Hoch mould that drops a 420 grain patch bullet at 0.452”. I’ve successfully patched this bullet using smokeless in my #1 for 25 years and rely on it for hunting. One day, I’ll spring for a 0.444” mould, but in the meantime, want to patch for my Sharps using black. I had the chamber cut for patching, but to date, only have shot grease groove bullets, and get the occasional “1 ragged” hole but am rewarded consistently with 1.5” groups. The downside, I’m using a bore rider and thumb seating which doesn’t allow me to extract the bullet if I decide to not shoot, which I’d want to do in the field if hunting. My goal is to get a hunting bullet that has adequate accuracy and allows for case and bullet to be extracted at will. Now that’s out of the way, can someone explain how, if any lube is used? Grease cookie under bullet or jojoba oil on patch? I don’t want to carry a rod to wipe and I don’t expect to fire more than three shots before getting back to camp and doing a clean up there. I don’t want to use a blow tube as I’d just as soon carry a rod and wipe