Nekvt,, if i truoil finish the browning stock,, is there a sanding/steel wool treatment that needs to be done first so the oil has some thing to grab onto.
Nekvt,, if i truoil finish the browning stock,, is there a sanding/steel wool treatment that needs to be done first so the oil has some thing to grab onto.
All I've done is make sure the existing finish is clean of dirt, oil or and wax. I don't do anything in between coats of the thinned TruOil and nothing after the 3 to 4 thin coats unless you want to dull or shine the finish different than it comes out but I usually leave as is.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |