Hope this is the right place for this
I took my wife to the range this weekend. While using my 1911 we ended up with a bullet stuck in the
barrel. These were my reloads and were loaded with the Berrys 230 gun plated bullets I was given for Christmas. Upon disassembly I found that it was stuck right at the end of the chamber, evan with the ring the case headspaces against. I soaked the barrel in oil overnight and today I knocked the bullet out from the muzzle end as there was far less distance to travel. I have clean the barrel thoroughly and can't see any rings or defects in the bore on the outside. From the sound I think I missed a powder charge and only the primer for power. Should I go ahead and reassemble and shoot or is there anything else I should check ??