8.15x46R Wehrmansgewehr.Shoots very well and includes 50 formed cases but no dies.If a "stop ring" mold used dies not needed.The neck area of chamber has radial scratches i believe got there when a case separated and was removed.the bore is great!the extractor is a modified standard 98 and care must be taken to be sure the rim is under the extractor before closing bolt.the area that grabs the case is very small.i was going to modify another extractor but never did.I made a tool to pull out cases that fall off.it rarely happens if you pay attention though.tool included.The previous owner took a plaque of the former owner in Germany off of the left side so there are 4 plug holes (I wish he would have left it) as you can see at 1 time it had a cut for an aperture sight that is also repaired.the stock has factory indent for bent bolt but rifle is straight bolt.
Thr front sight is slid right and marked by the factory with an index mark to note zero.it still shoots slightly right for me but I have an astigmatism so that's often the case with me and iron sights.
its favorite load is 11g of 2400 with pistol primer and the lee 8mm gc bullet sized .323 with no gascheck.i will include the mold.at 100 yards 5 shot groups typically under 2"
My description is honest as I can make it.i don't belive the gun is a rare collectable gun but it is a very accurate rifle and worth the $500 asking price.
I'll take it on thread and pm gets it.
SPF
Shipping by buyer.
Ships from me to your ffl or CR directly.
Attachment 286318
Attachment 286319
Attachment 286320
|
   
   
|
|
