An enjoyable 6 shots

[Texas by God]

A crazy nice 80 degrees at 8pm this evening, so I elected to sight in my 30-30. I recently mounted my 6x Burris Fullfield 2 on it. I fired 3 shots at 40 yards into a nice 3/4" group. They were low and left. Holding the crosshairs on the Bullseye, looking through the scope I moved them to the bullet holes. The next 3 shots were also 3/4" a 1/4" to the right of the aiming point.
I'm planning on shooting groups at random chances until the aiming points are used up.
The load is 25 grains of 3031, CCI primers, with the C309170F Lee sized .309" lubed with LLA.
I think the 6x and Mauser are a good pair.

Sent from my SM-A716U using Tapatalk

[dverna]

TbG

Would love to see a picture of your .30/30 Mauser.

[725]

Me too.

[centershot]

I've always wanted a bolt action 30-30, love to see pics of your Mauser!

[PositiveCaster]

TbG

Would love to see a picture of your .30/30 Mauser.

https://castboolits.gunloads.com/sho...ghlight=mauser


.

[dverna]

Nice rifle

[richhodg66]

Nothing seems as nice to me as a trim sporter on a small ring Mauser. Mine is a 7x57.

I do have a Savage 340 in .30-30 which I like very much, it's not really what I'd call a tack driver with cast, but it's pretty good and not picky, shoots every cast combo I've shot through it pretty well.

[Texas by God]

My son shot it for the very first time. It was good to see him shooting his first Mauser and first 30-30 simultaneously. He called his flyer of his 6 shot group. He marked his shots with his initial. It's always great when my kids shoot with me- even though they are grown up.
I dont know how I deleted the previous post with the pics, op error no doubt.

[dverna]

TbG,

I am envious. All my .30/30's are lever actions. I have been on the look out for a 788 but when I do find one, the guy who owns it thinks VERY highly of it and I cannot justify the $$$.

If your gun has "warts" I am not seeing them. But you could try this stuff...

https://www.walmart.com/ip/Compound-...c&gclsrc=3p.ds

[ChristopherO]

That's what pure fun looks like. Thanks for sharing.

[smoked turkey]

I got out my older straight stocked Marlin 336 in 30-30 the other day. I was doing some penetration testing on gallon milk jugs of water. I have not found my cast 311041reloads for it yet, but the J word reloads were Speer 170 grain FN over 28 grains of IMR 3031. I was amazed at the penetration. The bullet sailed through 9 jugs of water veered off course and missed the 10th jug. My plan is to take that old 30-30 after Mrs whitetail, and put my new sausage stuffer to work this fall.

[444ttd]

oh my God!!!!!! you can't kill a deer with that. its so puny, unlike a MAGNUM!!!!!



nice rifle!!! is that a 93 mauser?

[Texas by God]

Yes, 444. It's the 1916 Spanish built version of the 1893 Mauser. The action is 100 years old this year I believe. I'd have to remove the front scope mount to confirm that, though.....

Sent from my SM-A716U using Tapatalk

[444ttd]

i have 2 1916 spanish mausers. the first one is at my gunsmith's and it will be a 6.5 swede. it had a horrible trigger, so i(or rather the gunsmith) put in a dayton trigger kit. he also did d&t for a scope and he bent the bolt handle. the second one is still up in the air.

[Texas by God]

And, we had a cool visitor while shooting!

Sent from my SM-A716U using Tapatalk

[444ttd]

so how did he shoot? the tarantula i mean....

[Texas by God]

I guess I should mention at this point that I would confidently hunt deer or hogs with this load-
This gun, aside from the barrel work, only required a rim stop screw on the follower and facing the bolt a bit and extractor relief. That's it. Load it carefully, stack the rims, and run it like a Mauser. It feeds just fine with no rail work. Maybe luck? I don't know if a 98 would work like this- but it might.....
The 30-30 is just a cool cartridge. The first US smokeless commercial cartridge. And I killed my first deer with one.
I always wanted a 788( or a Winchester 54!) but the funds for those were fleeting.


Sent from my SM-A716U using Tapatalk

[centershot]

Regarding the M98 mentioned above; As luck would have it I acquired an M98-based 270 Win. a couple days ago from an old friend. I inquired here about a 30-30 build on this action and the response was overwhelming ly "NO".

https://castboolits.gunloads.com/sho...99#post5228899

[Texas by God]

I saw that, Centershot. That's why I posted what I did about the feeding test with 30-30 to determine things from the start.
I know of a guy on here that converted an Arisaka 38 6.5 to .38-55 of all things- and it works.
I'm not saying that the 30-30 will work from a 98- but I'm not saying that it won't either.
As said about your .270, setting the barrel back and rechambering will be the easy way out. And you'll have a Mauser .270- like lots of people.
I've been waiting for someone to show me their Mauser 30-30 for a while, I'd love to see another one.
If you have to pay a gunsmith to do it all, yes it will be costly.

Sent from my SM-A716U using Tapatalk

[curdog]

That rifle has very clean lines(for lack of a better term) and is very cool. I like it and great job on it. I have a mauser that a friend did for me in 35 whelen and it looks alot like your rifle, simple but beautiful to me..................Curdog