8MM brass

[Echo]

This is probably not the right venue - but - I'm looking for 8MMX57 Mauser brass. I thought I had some, and I do - 20 cases. Looking for more. Suggestions, Please?

[bcp477]

Rather than wasting your money on hard to find (here in the US, anyway) Mauser brass...why not just make your own ? You can easily form 8mm Mauser brass from 30/06 or 270 Win. brass. By the time I gave up my last Mauser, virtually ALL of the brass I had for it was re-formed. You'll probably not have too much trouble finding 30/06 brass...

[wilecoyote]

I fully agree: I add that rather than paying in spades some cheap new rifle brass, I would prefer to use 30-06, also 2nd shot, but of some reliable brand, reformed according to the specifications of each of my 8x57 _

[15meter]

Or do a want to buy in the swapping and selling area.

You should find some there.

But the suggestion to reform from a donor case is valid advise.


Making 8x57 from 30/06 or 270 Winchester is a pretty straight forward conversion if you have access to the cases.

Or buying 06 or 270 cases may be cheaper/more available.

[Combat Diver]

or neck up 7x57 cases.

CD

[Minerat]

Don't offer to buy or sell any in this thread. It is a request for information and discussion thread only.

[toot]

30/06, 270, AND 7M/M, brass is a very strong parent case and will give you years of service. so as the guys stated, go for it. just lube lightly and trim them, and VIOLA!! 8m/m.

[usedtobeyoung]

I used to form 6.5-06 brass. I agree with previous posts, forming brass is easy once you get into it.

[toot]

same with 8 m/m 06. a nice round.

[15meter]

Or go here on this site:

https://castboolits.gunloads.com/sho...rted-8mm-brass


I don't know anything about it other than it's for sale and you're looking.