Titan ReloadingInline FabricationRotoMetals2Reloading Everything
MidSouth Shooters SupplyPBcastcoLee PrecisionLoad Data
Wideners Repackbox
Results 1 to 10 of 10

Thread: Anyone use a Butane stove to melt with?

  1. #1
    Boolit Buddy
    Join Date
    Mar 2021
    Posts
    248

    Anyone use a Butane stove to melt with?

    I found a free one burner Butane stove I'm thinking of using for light smelting and ladle pouring. Up till now I've been using my Lee 20lb for smelting and bottom pouring. Has anyone else used one? Fuel is not as readily available but not that difficult to find and appears to cost less per ounce than propane but don't know how that translates to btu's and overall cost or efficiency. The stove is rated at 8500 btu's

    Also what would be a good pot size and material to use for the purposes mentioned?

  2. #2
    Boolit Buddy Landy88's Avatar
    Join Date
    Jun 2017
    Posts
    442
    Cast iron is traditional for pots, but I've been happy with the tops of stainless double boilers from restaurant supply stores. They are heavy duty, affordable, and easy to keep clean. A potentially useful aside is that those stores often also sell those butane cartridges by the case, because caterers and such use them in quantity.
    The first purpose of the Second Amendment is too often overlooked, fostering a liberty of mind and action necessary in the people of a free republic.


    “Ironically, the only gun control in 19th century England was the policy forbidding police to have arms while on duty.”
    ~ Don B. Kates, Jr.

  3. #3
    Boolit Grand Master


    GregLaROCHE's Avatar
    Join Date
    Feb 2018
    Location
    Southern France by way of Interior Bush Alaska
    Posts
    5,286
    Butane doesn’t burn as hot as propane, but should work.

    I’ve always thought an old stainless pressure cooker would work well. Otherwise, a lot of people like me use a dutch oven. Don’t use anything aluminum!

  4. #4
    Boolit Buddy alfadan's Avatar
    Join Date
    Jan 2020
    Location
    Augusta KS
    Posts
    475
    If it works out ok, the asian markets sell the canisters much cheaper than even walmart.

  5. #5
    Boolit Buddy

    Txcowboy52's Avatar
    Join Date
    Oct 2016
    Location
    Somewhere between the Red and the Rio Grande
    Posts
    466
    Another vote for cast iron , stay away from aluminum!
    Keep your powder dry and watch your six !!

  6. #6
    Banned
    Join Date
    Dec 2018
    Posts
    3,409
    Quote Originally Posted by NEKVT View Post
    I found a free one burner Butane stove I'm thinking of using for light smelting and ladle pouring. Up till now I've been using my Lee 20lb for smelting and bottom pouring. Has anyone else used one? Fuel is not as readily available but not that difficult to find and appears to cost less per ounce than propane but don't know how that translates to btu's and overall cost or efficiency. The stove is rated at 8500 btu's

    Also what would be a good pot size and material to use for the purposes mentioned?

    IF you are currently smelting in your casting pot quit (pot get's dirty quick starts dripping more caster gets mad ----)

    yes, 8500btu will work, not as fast as a turkey fryer. I wouldn't go any bigger than an 8 inch stainless or castiron pot (cast iron can break) NOT Aluminum (but at 8500 but you might be OK)

    Best material ---- COWW clip-on wheel weights, range scrap + tin, and maybe a hardener


    PS: I use my one burner Butane stove for stir-frying, I have an electric stove (but the oven is great on clean cycle for annealing 22 lr brass

  7. #7
    Boolit Master
    farmerjim's Avatar
    Join Date
    Nov 2012
    Location
    St. Francisville, Louisiana
    Posts
    1,925
    Use a 5 gal propane cylinder cut at the top bend and a turkey firer. I can make a 200 lb batch of one alloy. Scoop the melt out with a large ladle.
    There is no difference between communism and socialism, except in the means of achieving the same ultimate end: communism proposes to enslave men by force, socialism—by vote. It is merely the difference between murder and suicide. Ayn Rand

  8. #8
    Boolit Master
    Join Date
    May 2013
    Posts
    3,557
    ive seen those stoves in pawn shops for as low as $10, that come in plastic storage box and use a fuel cylinder that kind of is very much like a can of spray paint, some Sams club stores sell them and also have packages of the fuel cylinders in the restaurant supply area. I was tempted too get one but fuel cost compared to getting a conversion part to run a Coleman stove off of 20lb propane tank is what changed my mind. as far as portable stove I stick with the Coleman and turkey fryer/crab boilers and 20lb propane tanks for economy.

  9. #9
    Boolit Master
    John Guedry's Avatar
    Join Date
    Dec 2005
    Location
    Baton Rouge La.
    Posts
    555
    Plus 1 on the turkey fryer/crawfish boiler.
    Old retired guy in Baton Rouge La.

  10. #10
    Boolit Grand Master
    bangerjim's Avatar
    Join Date
    Apr 2013
    Location
    out of here, wandering somewhere in the SW.
    Posts
    10,163
    Check out :

    http://www.engineeringtoolbox.com/fu...ues-d_510.html


    That site is your source for almost anything engineering-related.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check